Table of Contents
Advertisement
Page
Menu
Item
01
FUNCTION
IBAC
PEAKING PLUS
SW
02
TALLY/IND
UP TALLY
UP TALLY DIM
TALLY/IND
TALLY/IND DIM
03
PEAKING
PEAKING MODE [STD]/PLUS
COLOR/AREA
SEL
POSITION
PEAKING UP
COLOR DETECT EXEC
HUE PHASE
HUE WIDTH
Settings
Function
(default in [
])
OFF/[5]/15/30
For setting the time (minutes) after which the IBAC
(Intelligent Brightness Ambient Control) function is
activated.
For the IBAC function, see "On IBAC (Intelligent Brightness
Ambient Control)" on page 30.
[MODE1]/MODE2 For selecting the operation mode upon pressing the
ASSIGN. switch that is assigned the PEAKING PLUS
function.
MODE1: Toggles PEAKING MODE STD h PLUS.
MODE2: Toggles in the sequence of STD t COLOR t
AREA t BOTH t STD.
OFF/[ON]
For controlling the up-tally lamp.
ON: Enables the up-tally lamp.
OFF: Disables the up-tally lamp. (Does not light up even
when the camera receives red tally signals.)
1 to [5] to 10
For setting the brightness of the up-tally lamp.
Raising the value increases the brightness; lowering the
value decreases the brightness.
OFF/[ON]/
For controlling the indicators (including the tally indicators).
UPPER/LOWER
OFF: Activates the BATT indicator and the STATUS
indicator only.
ON: Activates all indicators including the tally indicators.
UPPER: Activates the indicators (including the upper tally
indicators) except the lower tally indicators.
LOWER: Activates the indicators (including the lower
tally indicators) except the upper tally indicators.
1 to [5] to 10
For setting the brightness of the indicators (including the
tally indicators).
Raising the value increases the brightness; lowering the
value decreases the brightness.
For selecting a peaking mode.
STD: Standard mode
PLUS: PEAKING PLUS mode
[COLOR]/AREA/
For selecting a peaking plus mode.
BOTH
COLOR: Sharpens the edges for the selected color only.
AREA: Sharpens the edges for the selected area only.
BOTH: Sharpens the edges for the selected color and
area only.
[CENTER]/
For selecting the effective PEAKING area when "AREA" or
"BOTH" is selected in "COLOR/AREA SEL."
UPPER/RIGHT/
The setting is linked to the "MAG POSITION" setting of the
LOWER/LEFT
MAGNIFICATION menu.
CENTER: Sharpens the edges of the center area.
UPPER: Sharpens the edges of the upper area.
RIGHT: Sharpens the edges of the right area.
LOWER: Sharpens the edges of the lower area.
LEFT: Sharpens the edges of the left area.
[OFF]/ON
For selecting whether to increase the peaking level by +6 dB
or not when "PLUS" is selected in "PEAKING MODE."
OFF: RANGE setting
ON: RANGE setting +6 dB
For detecting the color of which its edges are to be
enhanced.
This feature is enabled only when "COLOR" or "BOTH" is
selected in "COLOR/AREA SEL."
[0] to 359
For specifying the hue center position of which edge
enhancement is to be performed.
–99 to [0] to 99
For specifying the hue range of which edge enhancement is
to be performed.
47
Using the Menu
Hide quick links:
Advertisement
Table of Contents
