Table of Contents
Advertisement
Turn the control clockwise to make the edges
sharper.
To specify both color and area
1
Press the ASSIGN. switch that is assigned the
PEAKING PLUS function to switch to the
PEAKING PLUS mode.
The PEAKING PLUS indicator lights up.
You can also set to this mode using "PEAKING
MODE" from the PEAKING menu (see page 47).
2
Select "BOTH" under "COLOR/AREA SEL" of the
PEAKING menu.
3
Select an area under "POSITION" of the PEAKING
menu.
CENTER
UPPER
If the "POSITION" setting is changed, the "MAG
POSITION" setting in the MAGNIFICATION menu
will be changed too.
4
Press and hold the ASSIGN. switch that is assigned
the PEAKING PLUS function for one second or
more (the detection area marker appears in the center
of the screen), align the color to be corrected in the
detection area marker, and then release the switch.
The color that is to be corrected will be detected.
: Effective edge enhancement area
5
Adjust the effective edge enhancement area of the
color using the following menus in the PEAKING
menu.
• HUE PHASE: Hue center position
• HUE WIDTH: Hue range
• SAT WIDTH: Saturation range
6
Adjust the amount of correction with the PEAKING
control.
42
Using the Focus Assist Function
RIGHT
LOWER
LEFT
The edges of the object that coincides with the color
detected in step 4 are sharpened within the area
selected in step 3.
Turn the control clockwise to make the edges
sharper.
To enhance the edges of the entire image
1
Press the ASSIGN. switch that is assigned the
PEAKING PLUS function to switch to the STD
(standard) mode.
The PEAKING PLUS indicator lights up.
You can also set to this mode using "PEAKING
MODE" from the PEAKING menu (see page 47).
2
Adjust the amount of correction with the PEAKING
control.
Turn the control clockwise to make the edges
sharper.
MAGNIFICATION Function
This function enables you to display both images for
picture composition and for focusing at the same time.
1
Press the ASSIGN. switch that is assigned the
MAGNIFICATION function.
The image is magnified.
You can also set to this mode from the
MAGNIFICATION menu (see page 48).
2
Press and hold the ASSIGN. switch that is assigned
the MAGNIFICATION function.
The magnified area changes in the following
sequence.
You can also select an area under "MAG
POSITION" of the MAGNIFICATION menu (see
page 48).
CENTER
UPPER
RIGHT
If the "MAG POSITION" setting is changed, the
"POSITION" setting in the PEAKING menu will be
changed too.
3
Select one of the display modes (MODE1 to
MODE3) under "MODE SEL" of the
MAGNIFICATION menu.
LOWER
LEFT
Hide quick links:
Advertisement
Table of Contents
