Glowing Embers; Logo Placement; Front Facing And Inset Kit Installation - Napoleon Vittoria GD19N Installation And Operating Instructions Manual

40
7.6

GLOWING EMBERS

Tear the embers into pieces and place along the burner ports covering all of the burner. Care should be taken
to shred the embers into thin, small irregular pieces as only the exposed edges of the fi bre hairs will glow. The
ember material will only glow when exposed to direct fl ame; however, care should be taken to not block the
burner ports.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. Phazer
logs glow when exposed to direct fl ame. Use only certifi ed "glowing embers" and Phazer
your Napoleon® dealer.
7.7

LOGO PLACEMENT

Remove the backing of the logo supplied and place on the glass viewing door, as indicated.
7.8

FRONT FACING AND INSET KIT INSTALLATION

THE COMPONENTS IN THIS KIT ARE HEAVY, USE CARE WHEN LIFTING AND ENSURE THEY ARE
THIS FRONT FACING DOES NOT REPLACE THE MAIN GLASS DOOR. DO NOT OPERATE WITHOUT
THE FRONT FACING CAN SIT FLUSH WITH A COUNTER, FLOOR, OR HEARTH.
W415-0825 / 07.06.09
WARNING
!
FIRMLY SECURED ONCE INSTALLED.
THE MAIN GLASS DOOR INSTALLED.
7.8.1 Secure the
1 2
insets and
3
screens to
the front facing
5
with the lock
tooth washers
and hex nuts
supplied.
7.8.2 Install the turn
7
button to the
face of the fi rebox
using the 2 fl at
head screws sup-
plied.
TM logs available from
1
/ "
2
1
/
LOGO
7
FIREBOX
TM
"
2