Manually Controlling The Antenna - KVH Industries TracVision G4 Technical Manual

TracVision G4 Technical Manual
Figure 3-28
Manual Antenna
Control Procedure
If the manual adjustment of the
antenna reached the maximum
rotation (720°), the antenna will
rotate 360° and return to the
Manual Control Antenna screens.
If the system started up in Instant
On mode, the following message
may be displayed:
InstantOn Reboot
Please wait
82

Manually Controlling the Antenna

In certain circumstances, you may need to control the azimuth,
elevation, and tracking of the TracVision G4 antenna manually,
using the process shown in Figure 3-28. Use the + and - keys to
manually move the dish. Azimuth measurements are reported as
relative to the bearing of the vessel's bow.
Man control antenna?
Enter Next
ALERT SCREENS
Finding limit switch
Please wait
AZ = XXX.X° EL = XX.X°
- Azimuth
AZ = XXX.X° EL = XX.X°
- Elevation
Make antenna track?
Yes No
Return
Proceed to "Restarting the
Antenna"
This screen may appear under
certain conditions in antenna
software revision H or later.
+
+
YES tells the antenna to begin
actively tracking the set azimuth
Cancel
and elevation. NO leaves the
antenna halted in its current
position.
54-0147