Startup And Self-Test - KVH Industries TracVision G8 Owner's Manual

3.1

Startup and Self-test

To turn on the TracVision G8, follow the steps below.
1. Turn on the satellite TV receiver and the television.
2. Apply operating power to the MCU.
3. Wait while the system initializes and searches for the
satellite.
The MCU displays the following screens during system startup:
TracVision G8 Startup Screens
Figure 3-1
KVH Industries, Inc.
TracVision G8
Antenna initializing
Sat A Menu Sat B
Init RF Board
Sat A Menu Sat B
Init Antenna
Sat A Menu Sat B
Limit Switch Test
Sat A Menu Sat B
Init Sensor
Sat A Menu Sat B
Init Rate Bias
Sat A Menu Sat B
54-0198
Search mode 1
Sat A Menu Sat B
Search mode 2
Sat A Menu Sat B
Search mode 3
Sat A Menu Sat B
Entering Tracking
Sat A Menu Sat B
Network ID Check
Sat A Menu Sat B
Tracking <SAT NAME>
Sat A Menu Sat B
To Main Display
Using the MCU Interface
"Search Mode" screens may not
appear during every startup.
59