Using Repdial Keys - Siemens optiPoint 410 advance S User Manual

Operating the Telephone with the Display
Step by Step
Store?
Notebook
Dial?
34
:
The other party's number is displayed. Confirm "Store"
>
to store the number.
or
o
Enter another number of your choice and confirm.
"Entry stored" confirms that the number has been
saved.
Calling a stored number
The idle display appears.
Press the "Notebook" function key.
The stored number is displayed.
:
Start the dialing process.
>

Using Repdial Keys

The Repertory Dialing function is similar to selected
dialing. However, it can also incorporate dialing control
functions at any point within the repertory dialing se-
quence.
Control Function Action During Dialing
OK <OK>
Pause <PA>
Consultation <CS> Establish a consultation call at
Clear <CL>
Procedure for programming Repdial keys, see
page 56.
Any characters following this
control function are sent imme-
diately after the call has been
answered, and are sent as DT-
MF .
Waits 3 seconds before sending
any characters following this
control function.
this point.
Clear the current call at this
point.