Prepare For Installation; Multiterminal And Standalone Systems - VeriFone HPV-20 Installation Manual

Prepare for Installation

Multiterminal and Standalone Systems

Install the HPV-20 System in the following order, using the procedures
beginning on the next page:
1. Install the Ruby application software on the terminal.
Note: You may allow the software to continue installing while you
2. Set up the HPV-20 System hardware.
3. Install the HPV-20 System software on the e-PC.
4. Multiterminal Systems: Install the Ruby application software on the
workstations.
do the next procedure.
HPV-20 Installation Guide
2
9