Table of Contents
Advertisement
HOW TO INITIALIZE THE DVD RECORDER & VCR
To put the program back at the factory-default, initialize the DVD recorder & VCR as the following procedure.
< DVD Section >
1. Turn on the DVD recorder & VCR.
2. Confirm that no disc is loaded or that the disc tray
is open. To put the DVD recorder & VCR into the
Version display mode, press [DVD], [CM SKIP],
[1], [2], and [3] buttons on the remote control unit
in this order.
Fig. a appears on the screen.
*1: " ******* " differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION DISP
MODEL NAME :
DVB-T VERSION:
FE VERSION :
BE VERSION :
TT VERSION :
DV UNIQUE ID:
LD ADJUSTMENT :
DISC ADJUSTMENT :
DEFAULT SETTING : ENTER
EXIT : RETURN
Fig. a Version Display Mode Screen
3. Press [ENTER/OK] button, then the DVD recorder
& VCR starts initializing. When the initializing is
completed, the DVD recorder & VCR exits the
Version display mode and turns off the power
automatically.
*
To move into the Normal mode from the
Version display mode, press [RETURN/BACK]
button on the remote control unit instead of
[ENTER/OK] button.
*
When [STANDBY-ON] button is pressed
before [ENTER/OK] button is pressed, the
DVD recorder & VCR exits the Version display
mode, then the power turns off.
Note: By initializing, "Current Clock", "Setup
Changing Item", "Channel Setup" and "Timer
Program" are initialized.
*******
***.***
***_***_***
*************
************
******** ********
OK
OK
1-8-1
E9TF0INT
Hide quick links:
Advertisement
Table of Contents
