Panasonic KX-TG6321C Operating Instructions Manual page 25

TG63xxC_OI.book Page 25 Wednesday, February 20, 2008 2:15 PM
Feature Feature
code
Set flash
{1}{2}{1}
*6
time
*7
Set line mode
{1}{2}{2}
Store VM
{3}{3}{1}
access#
Time
{2}{2}{6}
*8
adjustment
(Call Display
subscribers only)
V.M. access
{3}{3}{0}
VM tone detect
{3}{3}{2}
For the answering system (KX-TG6321/KX-TG6322/KX-TG6323/KX-TG6324)
Feature Feature
code
Message play
{3}{0}{0}
Recording time
{3}{0}{5}
Remote code
{3}{0}{6}
Ring count
{2}{1}{1}
Voice prompt
{1}{1}{2}
(Change language)
*1 If "System setting" column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Call Display service and want to view the caller's information
after lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you select
a melody, you cannot distinguish lines by their ringers.
*5 If you select one of the melody ringer tones, the ringer tone will continue to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*6 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary.
Setting code
{1}: <700ms> {2}: 600ms
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
{1}: A {2}: <B>
–
{1}: <Caller ID
[auto]>
{0}: Manual
–
{1}: <On> {0}: Off
Setting code
–
{1}: 1min {2}: 2min
{3}: <3min>
{0}: Greeting only
<111>
{2}–{7}: 2–7 rings <4>
{0}: Toll saver
{1}: <English>
{2}: Français
Programming
System Page
*1
setting
18
r
–
r
39
r
–
r
– 40
39
r
System Page
*1
setting
– 35
38
r
36
r
37
r
15
r
25