Wireless Networking Problems - Toshiba encore 2 User Manual

94
If Something Goes Wrong

Wireless networking problems

Run the printer's self-test to check for any problem with the
printer itself.
Make sure you installed the proper printer drivers as shown
in the instructions that came with the printer.
You may have connected the printer while the device is on.
Disable Sleep mode, turn off the device, and turn off the
printer. Turn the printer back on, make sure it is online, and
then turn the device back on.
Try printing another file. For example, you could create and
attempt to print a short test file using Notepad. If a Notepad
file prints correctly, the problem may be in your original file.
If you cannot resolve the problem, contact the printer's
manufacturer.
The printer will not print what you see on the
screen.
Many programs display information on the screen differently
from the way they print it. See if your program has a print
preview mode. This mode lets you see your work exactly as
it will print. Contact the software manufacturer for more
information.
Wireless networking problems
NOTE
❖
If your device is equipped with an internal Wi-Fi
adapter, verify that Airplane mode is OFF, see
up for communications" on page
❖
Verify that your device can detect access points or
routers. If it can detect a Wi-Fi
then it may be a configuration issue.
❖
Verify that signal strength is good using the utility
provided with the Wi-Fi
This section provides general troubleshooting tips for
networking problems, specifically wireless (Wi-Fi
networking.
The terms and concepts used assume a basic
understanding of networks, and may be for more
advanced users. If you need assistance or if you are not
familiar with the terminology, please see Windows
and Support or contact your computer technician.
73.
®
access point or router
®
adapter.
®
)
®
Help
®
"Setting