Toshiba encore 2 User Manual page 86

86
If Something Goes Wrong
The Windows
Command Prompt
The command prompt is a very powerful tool for advanced
users.
Startup Settings
In previous Operating Systems the majority of the options
found on this menu were available by pressing the
during the Windows
❖
Enable low resolution video mode
Restarts Windows
resolution. This allows you to reset your display settings
in the event they have been improperly set.
❖
Enable debugging mode
Starts Windows
❖
Enable boot logging
Creates a file that lists all the drivers that are installed
during startup
❖
Enable Safe Mode
Starts Windows
services. If the device starts and runs in Safe Mode, you
will know the Operating System is most likely working
properly and that you should look to third-party
applications or drivers for the source of your problem.
❖
Disable driver signature enforcement
Allows drivers containing improper signatures to be
installed
❖
Disable early-launch anti-malware protection
Allows drivers to initialize without being measured by the
Anti-malware driver
❖
Disable automatic restart on system failure
Prevents Windows
error causes it to fail. Choose this option only if
Windows
restart, and fails again repeatedly.
®
operating system is not working
®
boot process:
®
using your current video driver at low
®
in an advanced troubleshooting mode
®
with a minimal set of drivers and
®
from automatically restarting if an
®
is stuck in a loop where it fails, attempts to
key
F8