Table of Contents
Advertisement
No
Parts
Samsung Electronics
Procedure
9) Push the fixing buckle with your thumb
to disassemble the black cable tie of the
control box.
10) Use a knife to cut off the cable tie.
Unfasten the two bolts fixing the harness.
11) Unfasten the two bolts in the lower area
of the metering device and disassemble
the harness. (Use +Screw Driver)
12) Disassemble the plug for the reactor
connection cable.
13) Unfasten the one bolt fixing the inverter
control box and the central separation
board. (Use +Screw Driver)
Disassembly and Reassembly
Remark
3-21
Hide quick links:
Advertisement
Table of Contents
