Table of Contents
Advertisement
No
Parts
2
Control-Box
Samsung Electronics
Procedure
6) Disassemble the bolts that are assembled
with the indoor unit at the 4 panel corners.
7) Press the Steel Hangers at both sides of the
panel inwards, and rotate them 90 degrees
to remove it from the indoor unit's Hock.
Remove the panel from the indoor unit.
1) Disconnect the Connector Wire that is
connected to the indoor unit's PBA from the
PBA.
2) Unscrew the 2 fixed screws on both sides of
the Control Box, and disassemble the Control
Box from the indoor unit. (Use +Screw Driver)
Disassembly and Reassembly
Remark
3-3
Hide quick links:
Advertisement
Table of Contents
