Samsung AVXCSH023/032/040CE Service Manual page 67

Disassembly and Reassembly
No Parts
7 Fan
&
Motor
7 Evap. Temperature
Sensor
3-6
Procedure
1) Turn the hexangular nut attached to the top
of the Fan counterclockwise to remove it.
Take the Fan out of the Motor.
2) Turn the three hexangular nuts on the
Motor counterclockwise to remove the
nuts. Take the Motor Wires attached to
these three locations out with your hands
prior to removing the Motor.
1) Remove the screws of the 2 Steel Holder
Evaps that are used to fix the Heat
Exchanger, and then remove it.
(Use +Screw Driver)
2) Remove the 2 fixing screws of the Partition
Evap at the Heat Exchanger's In/Out Pipe.
(Use +Screw Driver)
Remark
Samsung Electronics