Chapter 2: Engineering Mode; Engineering Mode - Classic Console - Vision Fitness R20 Service Manual

CHAPTER 2: ENGINEERING MODE

2.1 Engineering Mode – Classic Console
1) To enter Engineering Mode, press & hold the RESISTANCE UP and DOWN keys at the same time for 3-5 seconds
until Engineering Menu appears on the display.
2) Use the RESISTANCE UP or DOWN keys to scroll through a list of parameters.
3) Press ENTER to enter a parameter setting.
4) Use the RESISTANCE UP or DOWN keys to change the parameter.
5) Press the ENTER key to save the change to the parameter.
6) Press and hold the STOP key to exit Engineering Mode and return to normal operation.
6