4.8 Troubleshooting – iPod Issues
Symptom: "
Cannot Connect the iPod" is shown on the screen.
Reason:
1. The iPod cable is damaged or disconnected.
2. The FFC wire is damaged or disconnected.
3. The iPod board or console is defective.
Solution:
11nfir1. Check the iPod cable for damage. Make sure it has a good connection.
2.
2. Check the connection of the FFC wire at the iPod board and UCB.
3. If the FFC and iPod cables are well connected and not damaged, replace the console.
b. Replace the iPod cable and try again. Refer to the figure below regarding the iPod cable and the iPod
board.
CHAPTER 4: TROUBLESHOOTING
iPod FFC connected to
the UCB
FFC wire connected from
the iPod board to the UCB
iPod board
iPod wire
t broken or damaged.
35