Using Service Jig; Self-Diagnosis Function - Sony HDR-UX3E Service Manual

1-4. USING SERVICE JIG

1. Connect the extension cable (J-6082-413-A) between CN6011 on the DH-042 board and CN1016 on the VC-487 board.
2. Connect the extension cable (J-6082-656-A) between CN1005 on the VC-487 board and CN4006 on the MD-134 board.
VC-487 BOARD (SIDE B)
CN1005
CN4006
MD-134 BOARD (SIDE A)

1-5. SELF-DIAGNOSIS FUNCTION

1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder or LCD screen
C : 3 1 : 1 1
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
HDR-UX3E/UX5/UX5E/UX7/UX7E_L2
Extension cable (100P)
J-6082-413-A
CN1016
(Side A)
Extension cable (120P)
J-6082-656-A
Blinks at 3.2Hz
C 3 1 1 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the "repaired by:", "block" in which the problem
occurred, and "detailed code" of the problem.
Detailed Code
Refer to "1-5-3. Self-diagnosis Code Table".
1-2
ENGLISH
ENGLISH
DH-042 BOARD
(SIDE A)
CN6011
(Side B)
JAPANESE
JAPANESE