Using Service Jig - Sony HVR-HD1000J Service Manual

1-4. USING SERVICE JIG

Connect the CPC-15 jig connector (J-6082-564-A) and I/F unit for LANC control (J-6082-521-A) to the CN8102 on the US-014 board.
VC-500 BOARD
1-5. SELF-DIAGNOSIS FUNCTION
1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder or LCD screen
C : 3 1 : 1 1
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
FP-786 Flexible
CN1012
(SIDE A)
Blinks at 3.2Hz
C 3 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
FLexible Flat Cable (FFC-107)
CN8102
MS-379 BOARD
(SIDE A)
US-014 BOARD
(SIDE A)
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the "repaired by:", "block" in which the problem
occurred, and "detailed code" of the problem.
1 1
Detailed Code
Refer to "1-5-3. Self-diagnosis Code Table".
1-2
ENGLISH
ENGLISH
CPC-15
(J-6082-564-A)
8
1
I/F unit for LANC control
JAPANESE
JAPANESE
(J-6082-521-A)