Nikon 1 aw1 Reference Manual page 84

❚❚ Setting the Depth Gauge to Zero
Follow the steps below to set the depth gauge to zero.
Select Alt./depth correction.
1
In the setup menu, select Altitude/
depth options, then highlight Alt./
depth correction and press 2.
P
2 Select Correct manually.
Highlight Correct manually and press
2.
3 Set the depth gauge to zero.
Press 4 or 2 to highlight digits and
press 1 or 3 to change. Press J
when changes are complete.
A
See Also
For information on altitude and depth options, see page 196.
59