Page 1 DIGITAL CAMERA Reference Manual...
Page 2 Thank you for your purchase of a Nikon digital camera. To get the most from your camera, please be sure to read all instruc- tions thoroughly and keep them where they will be read by all who use the product.
Page 3 Getting the Most from Your Camera Table of Contents Introduction Still Image Mode Smart Photo Selector Mode Movie Mode Motion Snapshot Mode Available Settings More on Photography More on Playback Connections The Playback Menu The Shooting Menu The Setup Menu Technical Notes 0 21 0 31...
Page 4 Getting the Most from Your Camera Take pictures or movies in any of four modes. Choose q Motion Snapshot mode (0 45) to record both photographs and brief movie vignettes, w Smart Photo Selector mode (0 31) to capture fleeting changes of expression and other hard-to-time shots, e still image mode (0 21) for most photographs, or...
Page 5 HDMI cable to w connect the camera to an HDTV (0 84). Accessories Expand your photographic horizons with a wide variety of inter- changeable lenses and other accessories (0 157). Lenses Software for Nikon digital cameras (available on Remote controls...
Page 6: Table Of Contents
Table of Contents Getting the Most from Your Camera ... ii Accessories ... iii Table of Contents ...iv For Your Safety... x Notices...xiii Introduction... 1 Package Contents...1 Parts of the Camera...2 The Camera Body ... 2 The Monitor... 4 The $ (Display) Button ... 5 The Mode Dial ...
Page 7 Movie Mode ... 37 HD Movies... 37 Slow Motion ...40 Viewing Movies ...42 Deleting Movies ... 43 Motion Snapshot Mode... 45 Shooting in Motion Snapshot Mode ... 45 Viewing Motion Snapshots ...48 Deleting Motion Snapshots ... 48 Available Settings... 49 More on Photography...
Page 8 Connections ... 75 Installing the Supplied Software...75 System Requirements...77 Viewing and Editing Pictures on a Computer ...79 Transferring Pictures...79 Viewing Pictures ...80 Creating Short Movies...82 Viewing Pictures on TV...84 High-Definition Devices...84 Printing Photographs ...86 Connecting the Printer...86 Printing Pictures One at a Time...87 Printing Multiple Pictures...88 Creating a DPOF Print Order: Print Set ...92 The Playback Menu ...
Page 9 Image Quality...114 Image Size...114 Frame Rate...116 Movie Settings ...116 Metering ...117 Autoexposure Lock ...118 White Balance ...119 Fine-Tuning White Balance...120 Preset Manual ...121 ISO Sensitivity ...124 Picture Control...125 Modifying Picture Controls ...125 Custom Picture Control...129 Edit/Save...129 Load from/Save to Card ...130 Color Space...131 Active D-Lighting ...132 Long Exposure NR...133...
Page 10 The Setup Menu ... 147 Reset Setup Options ... 149 Format Memory Card... 149 Slot Empty Release Lock ... 149 Welcome Screen ... 150 Monitor Brightness ... 150 Grid Display ... 150 Sound Settings... 151 Auto Power Off... 151 Remote on Duration ... 152 Assign AE/AF-L Button ...
Page 11 Caring for the Camera and Battery: Cautions...164 Defaults...168 Memory Card Capacity...169 Troubleshooting...171 Display ...171 Shooting (All Exposure Modes) ...172 Shooting (P, S, A, and M Modes) ...173 Movies...174 Playback ...174 Miscellaneous ...175 Error Messages...176 Specifications...180 Nikon 1 J1 Digital Camera ...180 Battery Life ...190 Index ...191...
Page 12: For Your Safety
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equip- ment. Keep these safety instructions where all those who use the product will read them.
Page 13 Do not remain in contact with the camera or charger for extended periods while the devices are on or in use. Parts of the device become hot. Leaving the device in direct contact with the skin for extended periods may result in low-temperature burns.
Page 14 Use appropriate cables. When connect- ing cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose to maintain compliance with product regulations. CD-ROMs: CD-ROMs containing soft- ware or manuals should not be played back on audio CD equipment.
Page 15: Notices
• For more information, contact the retailer or the local authorities in charge of waste management. • Nikon will not be held liable for any damages resulting from the use of this product. • While every effort has been made to...
Page 16 Interface Cables Use the interface cables sold or pro- vided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.
Page 17 Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally cop- ied or reproduced by means of a scanner, digital camera, or other device may be punishable by law. • Items prohibited by law from being copied or reproduced Do not copy or reproduce paper money, coins, securities, govern-...
Page 18 Only Nikon brand electronic accessories (including charg- ers, batteries, AC adapters, and flash accessories) certified by Nikon specifi- cally for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic cir- cuitry.
Page 19 Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for dam- ages or lost profits that may result from product malfunction.
Page 20 xviii...
Page 21: Introduction
Introduction Package Contents Confirm that the package contains the following items. Nikon 1 J1 digital camera AN-N1000 strap ViewNX 2/Short Movie Creator CD Memory cards are sold separately. EN-EL20 rechargeable Li-ion battery (with terminal cover) UC-E15 USB cable Warranty Quick Start Guide User’s Manual...
Page 22: Parts Of The Camera
Parts of the Camera Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual. The Camera Body Movie-record button ...38 Shutter-release button...25, 32, 39 Power switch...17...
Page 23 Flash pop-up control ...58 Memory card access lamp ... 15, 24 & (feature) button ... 8 W (playback zoom/ thumbnail) control...28, 141 Mode dial... 6 Connector cover K (playback) button ...28, 34, 48 O (delete) button... 35, 69 Power connector cover for optional power connector ...161 Battery-chamber/memory card slot cover latch...
Page 24: The Monitor
The Monitor Shooting mode ... 6 Exposure mode ... 106 Flexible program indicator ... 108 Flash mode ...58 Flash-ready indicator ...58 Self-timer/ remote control mode ...53 Continuous mode Active D-Lighting Picture Control White balance Movie settings (HD movies) Frame rate (slow motion movies) Image size ...
Page 25: The $ (Display) Button
The $ (Display) Button Press $ to cycle through shooting (0 4) and playback (0 63) indicators as shown below. Shooting Simplified display Detailed display The Framing Grid A framing grid can be displayed by selecting On for Grid display in the setup menu (0 150).
Page 26: The Mode Dial
The Mode Dial The camera offers a choice of the follow- ing shooting modes: Motion Snapshot mode (0 45): Each time the shutter is released, the cam- era records a still image and about a second of movie footage. When the resulting “Motion Snapshot”...
Page 27: The Multi Selector
The Multi Selector The multi selector and J button are used to adjust settings and navigate the camera menus (0 9). Settings: A Lock exposure (0 118) and/or focus (0 143). Menu navigation: 1 Move cursor up. Settings: E View self-timer/ remote-control menu (0 53).
Page 28: The & (Feature) Button
The & (Feature) Button The & button gives access to the follow- ing features in still-image, movie, Motion Snapshot, and playback modes. Press & and use the multi selector (or W control) and J button to adjust options. • Continuous (still-image mode; 0 26): Choose from Single frame, Continuous, or Electronic (Hi).
Page 29: The G Button
The G Button Most shooting, playback, and setup options can be accessed from the camera menus. To view the menus, press the G button. Tabs Choose from the following menus: K Playback menu (0 93) C y 1 z Shooting menu (0 103) G button B Setup menu (0 147) Menu options...
Page 30 Using the Menus Use the multi selector to navigate the menus (0 7). Press 1 or 3 to select the tab then press 2 to display menu items. Highlight menu item and press 2 to display options. Highlight desired option and press J to select. Note: The items listed may vary with camera settings.
Page 31: First Steps
First Steps Attach the camera strap. Attach the strap securely to the two camera eyelets. Charge the battery. Insert the battery battery fully charges in about 2 hours. Unplug the charger and remove the battery when charging is complete. The Plug Adapter Depending on the country or region of purchase, a plug adapter may be sup- plied with the charger.
Page 32 35°C/95°F. If the CHARGE lamp flickers during charging, cease use immediately and take battery and charger to your retailer or a Nikon-authorized service representative. Do not move the charger or touch the battery during charging. Fail- ure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged.
Page 33 Insert the battery and a memory card. Check to be sure the battery and card are in the correct orien- tation. Using the battery to keep the orange battery latch pressed to one side, slide the battery in until it latches, and then slide in the memory card until it clicks into place.
Page 34 Inserting and Removing Batteries and Memory Cards Always turn the camera off before inserting or removing batteries or memory cards. Note that the battery may be hot after use; observe due caution when removing the battery. Formatting Memory Cards If this is the first time the memory card will be used in the camera or if the card has been formatted in another device, select Format memory card in the setup...
Page 35 Removing Batteries and Memory Cards After turning the camera off, confirm that the access lamp (0 3) is off and open the battery-chamber/memory card slot cover. To remove the battery, first release it by pressing the orange battery latch in the direction shown by the arrow and then remove the battery by hand.
Page 36 Attach a lens. Be careful to prevent dust from entering the camera when the lens or body cap is removed. The lens generally used in this manual for illustrative purposes is a 1 NIKKOR VR 10–30 mm f/3.5–5.6. See page 136 for information on vibration reduc- tion (VR).
Page 37 Turn the camera on. Press the power switch to turn the camera on. The power lamp will briefly light green and the monitor will turn on. Turning the Camera Off To turn the camera off, press the power switch again. The monitor will turn off.
Page 38 Choose a language and set the clock. A language-selection dialog will be displayed the first time the camera is turned on. Use the multi selector and J button (0 10) to choose a language and set the camera clock. Pho- tos can not be taken until you have set the time and date.
Page 39 The Camera Clock The camera clock is less accurate than most watches and household clocks. Check the clock regularly against more accurate time pieces and reset as necessary. The camera clock is powered by an independent, rechargeable power source, which is charged as necessary when the main battery is installed or the camera is powered by an optional EP-5C power connector and EH-5b AC adapter (0 161).
Page 40 Check the battery level and memory card capacity. Check the battery level and number of exposures remaining in the moni- tor. Battery Level Display NO ICON Cannot take pictures. Insert fully-charged battery. Number of Exposures Remaining The monitor shows the number of pictures that can be stored on the memory card at current settings (values over 1,000 are rounded down to the nearest hundred;...
Page 41: Still Image Mode
Still Image Mode Still image mode is the mode generally used for taking photos. Available Settings For information on the options available in still image mode, see page Taking Photos in Still Image Mode Select still image mode. Rotate the mode dial to C. Automatic Scene Selection (h Scene auto selector) At default settings, the camera will auto- matically analyze the subject and select...
Page 42 Ready the camera. Remove the lens cap and hold the camera securely with both hands, being careful not to obstruct the lens, AF-assist illuminator, or microphone. Rotate the camera as shown at lower right when taking pictures in “tall” (portrait) orientation. Shutter speeds slow when lighting is poor;...
Page 43 Frame the photograph. Position your subject in the center of the frame. Focus. Press the shutter-release button half- way to focus. If the subject is poorly lit, the AF-assist illuminator (0 2) may light to assist the focus operation. If the camera is able to focus, the selected focus area will be highlighted in green and a beep will sound (a beep may not sound if the subject is moving).
Page 44 Shoot. Smoothly press the shutter-release button the rest of the way down to release the shutter and record the photograph. The access lamp will light and the photograph will be dis- played in the monitor for a few sec- onds (the photo will automatically clear from the display and the camera will be ready to shoot when the shut- ter-release button is pressed halfway).
Page 45 The Shutter-Release Button The camera has a two-stage shutter-release button. The camera focuses when the shutter-release button is pressed halfway. To take the photograph, press the shutter-release button the rest of the way down. Movie Recording In still image mode, movies can not be recorded and pressing the movie-record button has no effect.
Page 46 Choosing a Release Mode Press & button and use the multi selector and J button to choose from the follow- ing release modes: Single frame (the camera takes one photograph each time the shutter-release button is pressed), Continuous (the camera records photos at up to 5 frames per second while the shutter release button is held down), and Electronic (Hi) (the camera records pho-...
Page 47 Buffer Size The camera is equipped with a memory buffer for temporary storage, allowing shooting to continue while photographs are being saved to the memory card. Up to 100 photographs can be taken in succession; note, however, that the frame rate will drop or shooting will pause when the buffer is full.
Page 48: Viewing Photographs
Viewing Photographs Press K to display your most recent pho- tograph full frame in the monitor (full- frame playback). Press 4 or 2 or rotate the multi selector to view additional pictures. To zoom in on the center of the current image, press the W control up (0 68).
Page 49: Deleting Pictures
Deleting Pictures To delete the current picture, press O. Note that once deleted, pic- tures can not be recovered. Display the photograph. Display the photograph you wish to delete as described on the preceding page. Delete the photograph. Press O. A confirmation dialog will be displayed;...
Page 51: Smart Photo Selector Mode
Smart Photo Selector Mode Choose Smart Photo Selector mode for photos that capture a fleeting expression on the face of a portrait subject or other hard-to-time shots such as group photos in party scenes. Each time the shutter is released, the camera automatically selects the best shot and four best shot candidates based on composition and motion.
Page 52 Frame the photograph. Holding the camera as shown on page 22, compose the photograph with your subject in the center of the frame. Begin buffering photographs. Press the shutter-release button half- way to focus (0 23). An icon will be displayed as the camera begins recording images to the memory buffer.
Page 53 Shoot. Smoothly press the shutter-release button the rest of the way down. The camera will compare shots recorded to the buffer both before and after the shutter-release button was pressed, and select five to copy to the memory card. Note that some time may be required.
Page 54: Viewing Photographs
Viewing Photographs Press K and use the multi selector to display photographs taken with the Smart Photo Selector (0 28; pictures taken with the Smart Photo Selector are indicated by a y icon). Of the five pho- tographs recorded by the Smart Photo K button Selector, only the best shot will be dis- played (when you press the multi selec-...
Page 55: Deleting Pictures
Deleting Pictures Pressing O when a picture taken with the Smart Photo Selector is selected displays a confirmation dialog; press O again to delete the best shot and the four best shot candidates, or press K to exit with- out deleting the pictures. Note that once deleted, pictures can not be recovered.
Page 57: Movie Mode
Movie Mode Choose movie mode to shoot high-definition (HD) or slow- motion (0 40) movies using the movie-record button. The 0 Icon A 0 icon indicates that movies can not be recorded. Available Settings For information on the options available in movie mode, see page 49. HD Movies Record movies with sound at an aspect ratio of 16 : 9.
Page 58 Start recording. Press the movie-record button to begin recording. A recording indica- tor, the time elapsed, and the time available are displayed while record- ing is in progress. Audio Recording Be careful not to cover the microphone and note that the built-in microphone may record sounds made by the camera or lens.
Page 59 Taking Photographs During HD Movie Recording Press the shutter-release button all the way down to take a photograph without interrupting HD movie recording. Photo- graphs taken during movie recording have an aspect ratio of 16 : 9. Taking Photographs During Movie Recording Up to 15 photographs can be taken with each movie shot.
Page 60: Slow Motion
Slow Motion Record silent movies with an aspect ratio of 8 : 3. Movies are recorded at 400 fps and play back at 30 fps. Select movie mode. Rotate the mode dial to 1. Select slow-motion mode. Press the & button and use the multi selector and J button to select Slow motion.
Page 61 Start recording. Press the movie-record button to begin recording. A recording indica- tor, the time elapsed, and the time available are displayed while record- ing is in progress. The camera focuses on the subject at the center of the dis- play;...
Page 62: Viewing Movies
Viewing Movies Movies are indicated by a 1 icon in full-frame playback (0 28). Press J to start playback. 1 icon/Length The following operations can be performed: Pause Play Advance/ rewind Adjust volume Return to full-frame playback Exit to shooting mode Current position/total length Guide...
Page 63: Deleting Movies
Deleting Movies To delete the current movie, press O. A confirmation dialog will be displayed; press O again to delete the movie and return to playback, or press K to exit without deleting the movie. Note that once deleted, movies can not be recovered. See Also See page 100 for information on trimming unwanted footage from movies.
Page 65: Motion Snapshot Mode
Motion Snapshot Mode Choose Motion Snapshot mode to record brief movie vignettes with your photographs. Each time the shutter is released, the camera records a still image and about a second of movie foot- age. When the resulting “Motion Snapshot” is viewed on the camera, the movie will play back in slow motion over approxi- mately 2.5 s, followed by the still image.
Page 66 Frame the picture. Holding the camera as shown on page 22, compose the photograph with your subject in the center of the frame. Begin buffering. Press the shutter-release button half- way to focus (0 23). An icon will be displayed as the camera begins recording footage to the memory buffer.
Page 67 Buffering Buffering begins when the shutter-release button is pressed halfway and ends after about 90 seconds or when the shutter-release button is pressed all the way down. Shutter-release button pressed halfway to focus Buffering Choosing a Theme To choose the background music for the movie, press &...
Page 68: Viewing Motion Snapshots
Viewing Motion Snapshots Press K and use the multi selector to display a Motion Snapshot (0 28; Motion Snapshots are indicated by a z icon). Pressing J when a Motion Snap- shot is displayed plays back the movie portion in slow motion over a period of K button about 2.5 s, followed by the photo;...
Page 69: Available Settings
Available Settings The following table lists the settings that can be adjusted in each mode. Still Image Mode/Smart Photo Selector Mode Exposure mode Image quality Image size Continuous Frame rate Movie settings Metering White balance ISO sensitivity Picture Control Color space Active D-Lighting Long exposure NR High ISO noise reduction z z z z z z...
Page 70 Exposure mode Focus area selection Flexible program Autoexposure Lock Focus lock Self-timer Exposure compensation Flash mode Movie mode Theme 1 P Programmed auto is selected automatically when Electronic (Hi) is selected for Continuous. 2 Not available when Electronic (Hi) is selected for Continuous. 3 VR lenses only.
Page 71 Movie Mode/Motion Snapshot Mode Exposure mode Image quality Image size Continuous Frame rate Movie settings Metering White balance ISO sensitivity Picture Control Color space Active D-Lighting Long exposure NR High ISO noise reduction z Fade in/fade out Movie sound options Interval timer shooting Vibration reduction Focus mode...
Page 72 Exposure mode Focus area selection Flexible program Autoexposure Lock Focus lock Self-timer Exposure compensation Flash mode Movie mode Theme 1 HD movie selected in movie mode. 2 Slow motion selected in movie mode. 3 VR lenses only. Movie mode Motion Snapshot mode M h P —...
Page 73: More On Photography
More on Photography Self-Timer and Remote Control Modes The self-timer and optional ML-L3 remote control (0 158) can be used to reduce camera shake or for self-portraits. The following options are available: c 10 s b 5 s a 2 s Delayed "...
Page 74 Select the desired option. Use the multi selector to highlight the desired option and press J. Frame the photograph and shoot. Self-timer mode: Press the shutter- release button halfway to focus, and then press the button the rest of the way down.
Page 75 Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be released. Turning the camera off cancels self-timer and remote control modes. Remote control modes are cancelled automatically if no operations are performed for about five minutes after the mode is selected in Step 3.
Page 76: Exposure Compensation
Exposure Compensation Exposure compensation is used to alter exposure from the value suggested by the camera, making pictures brighter or darker. Choose from values between –3 EV (underexposure) and +3 EV (overexposure) in increments of make the image brighter while negative values make it darker. Exposure compensation is not available in h Scene auto selec- tor and M Manual exposure modes.
Page 77 Exposure Compensation Exposure compensation is most effective when used with center- weighted or spot metering (0 117). The Built-in Flash When used with the built-in flash, exposure compensation affects both background exposure and flash level.
Page 78: The Built-In Flash
The Built-in Flash To use the flash, raise it by sliding the flash pop-up control and then choose a flash mode as described on the following page. Charging begins when the flash is raised; once charging is complete, a flash- ready indicator (I) will be displayed when the shutter-release button is pressed halfway.
Page 79: Choosing A Flash Mode
Choosing a Flash Mode Display the flash mode options. Press the multi selector down to dis- play a list of flash modes. The modes available depend on the exposure mode (0 103). Fill flash Red-eye reduction S, M Fill flash Red-eye reduction Rear-curtain sync Select a flash mode.
Page 80 0.6 m (2 ft). Some lenses may cause vignetting at greater distances or obstruct the red-eye reduction lamp, interfering with red-eye reduc- tion; for more information, visit a Nikon website. The following illustra- tions show the effect of vignetting caused by shadows cast by the lens when the built-in flash is used.
Page 81 Shutter Speed Shutter speed is restricted to the following ranges when a flash is used: Exposure mode h Scene auto selector (f) S Shutter-priority auto M Manual Other Aperture, Sensitivity, and Flash Range Flash range varies with sensitivity (ISO equivalency) and aperture. With the standard zoom lens at maximum aperture and ISO sensitivity set to ISO 100 to 3200, the range is approximately 0.6 m–5.0 m (2 ft–16 ft) when the lens is zoomed all the way out, 0.6 m–3.0 m (2 ft–9.8 ft) at...
Page 83: More On Playback
More on Playback Photo Information Photo information is superimposed on images displayed in full-frame playback (0 28). Press the $ button to cycle through simple photo information (0 63), detailed photo information (0 64), and no photo information. Simple Photo Information Still images Shooting mode ...
Page 84 Detailed Photo Information Shooting mode ... 6 Frame number/total number of images Protect status...96 Camera name Retouch indicator ...97, 98, 99 Movie edit indicator...100 Histogram showing distribution of tones in image ...65 ISO sensitivity ...124 Focal length ...186 Flash mode...58 Flash compensation...146 Exposure compensation ...56 Metering ...117...
Page 85 Histograms (0 64) Camera histograms are intended only as a guide and may differ from those in imaging applications. Sample histograms are shown below: • If brightness varies evenly across the image, the distribution of tones will be relatively even. •...
Page 86: Thumbnail Playback
Thumbnail Playback To view pictures in “contact sheets” of 4, 9, or 72 images, press W down when a pic- ture is displayed full frame. Full-frame playback The following operations can be performed: Display more images Display fewer images Highlight images View highlighted image Delete highlighted...
Page 87: Calendar Playback
Calendar Playback To view pictures taken on a selected date, press W down when 72 pictures are dis- played (0 66). Full-frame playback The following operations can be performed: Highlight date View pictures taken on highlighted date Delete pictures taken on highlighted date Exit to thumbnail display...
Page 88: Playback Zoom
Playback Zoom To zoom in on a photograph, display it full frame and press W up. Playback zoom is not available with movies or Motion Snapshots. The following operations can be performed: Zoom in or View other areas of image View faces Exit zoom Exit to...
Page 89: Deleting Pictures
Deleting Pictures Pictures can be deleted from the memory card as described below. Note that once deleted, pictures can not be recovered; protected images, however, will not be deleted. Deleting the Current Picture To delete the picture currently displayed in full-frame playback or selected in the thumbnail list, press O.
Page 90: Rating Pictures
Rating Pictures Rate pictures or mark them as candidates for later deletion (0 69). The Slide show option in the playback menu can be used to display only pictures with a selected rating or ratings (0 71). Ratings can also be viewed in ViewNX 2. Rating is not available with protected images.
Page 91: Slide Shows
Slide Shows To view a slide show of the pictures on the memory card, press the G button, select Slide show in the playback menu, and follow the steps below. Select the type of image used in the show. Highlight the desired option and press J. Display all the images on the memory card.
Page 92 Adjust display times and choose a background track. Adjust the following options: Frame interval Choose how long each still image is displayed. Movie playback time Audio Choose how much of each movie is played back before the next slide is displayed. Choose Same as frame interval to display the next slide after the time selected for Frame interval, No limit to play back the entire movie before displaying the next...
Page 93 Select Start. Highlight Start and press J to start the slide show. The following operations can be performed while a slide show is in progress: Skip back/skip ahead Pause/resume Adjust volume Exit to playback mode Exit to shooting mode The options shown at right are dis- played when the show ends.
Page 95: Connections
Connections Installing the Supplied Software Install the supplied software to copy pictures to your computer for viewing and editing pictures and creating short movies. Before installing the software, confirm that your system meets the requirements on page 77. Start the computer and insert the installer ViewNX 2/ Short Movie Creator CD.
Page 96 Start the installer. Click Install and follow the on-screen instructions. Exit the installer. Click Yes (Windows) or OK (Mac OS) when installation is com- plete. Windows Click Yes The following software is installed: • ViewNX 2 • Short Movie Creator •...
Page 97: System Requirements
System Requirements The system requirements for the Short Movie Creator are: 2 GHz intel Core 2 Duo or better Pre-installed versions of Windows 7 Home Basic/Home Pre- mium/Professional/Enterprise/Ultimate (Service Pack 1), Win- dows Enterprise/Ultimate (Service Pack 2), or Windows XP Home Edi- tion/Professional (Service Pack 3).
Page 98 The system requirements for the ViewNX 2 are: • Photos/JPEG movies: Intel Celeron, Pentium 4, or Core • H.264 movies (playback): 3.0 GHz or better Pentium D • H.264 movies (editing): 2.6 GHz or better Core 2 Duo Pre-installed versions of Windows 7 Home Basic/Home Premium/Professional/Enterprise/Ultimate (Service Pack 1), Windows Vista Home Basic/Home Premium/Business/ Enterprise/Ultimate (Service Pack 2), or Windows XP Home...
Page 99: Viewing And Editing Pictures On A Computer
If a message is displayed prompting you to choose a pro- gram, select Nikon Transfer 2. Windows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below. 1 Under Import pictures and videos, click Change pro- gram.
Page 100: Viewing Pictures
Click Start Transfer. At default settings, all the pictures on the memory card will be copied to the computer. Terminate the connection. If the camera is connected to the computer, turn the camera off and disconnect the USB cable. If you are using a card reader or card slot, choose the appropriate option in the com- puter operating system to eject the removable disk corre- sponding to the memory card and then remove the card from...
Page 101 Retouching Photographs To crop pictures and perform such tasks as adjusting sharp- ness and tone levels, click the Edit button in the toolbar. Creating Short Movies Use the Short Movie Creator to create short movies combining music, M otion Snapshots, movie footage, and photos taken in still image or Smart Photo Selector mode (0 82).
Page 102: Creating Short Movies
Creating Short Movies Use the supplied Short Movie Creator software to create movies combining photographs taken in still image or Smart Photo Selector mode with Motion Snapshots, movies, and music. Transfer pictures. Transfer pictures as described on page 79. Select components. Select pictures in ViewNX 2.
Page 103 Save the movie. Click Create Movie. The dia- log shown at right will be displayed; select one of the following options and click Create. • Save file: Save the movie to a folder on the computer. • Save to Camera (memory card): Save the movie to a mem- ory card so that it can later be played back on the cam-...
Page 104: Viewing Pictures On Tv
Viewing Pictures on TV Connect the camera to a television for playback. Connecting Video Cables Always turn the camera off before connecting or disconnecting HDMI cables. When connecting cables, do not use force or attempt to insert the connectors at an angle. High-Definition Devices A type C mini-pin High-Definition Multimedia Interface (HDMI) cable (available separately from third-party suppliers) can be...
Page 105 Close the Connector Cover Close the connector cover when the connectors are not in use. Foreign matter in the connectors can interfere with data transfer. Television Playback Volume can be adjusted using the controls on the television; adjusting volume on the camera has no effect. Use of an EH-5b AC adapter and EP-5C power connector (available separately) is recommended for extended playback.
Page 106: Printing Photographs
Printing Photographs Selected JPEG images can be printed on a PictBridge printer connected directly to the camera. Connecting the Printer Connect the camera using the supplied USB cable. Turn the camera off. Connect the USB cable. Turn the printer on and connect the USB cable as shown. Do not use force or attempt to insert the connectors at an angle.
Page 107: Printing Pictures One At A Time
Printing Pictures One at a Time Select a picture. Press 4 or 2 to view additional pic- tures. Press W up to zoom in on the current frame (0 68; press W down to exit zoom). To view nine pictures at a time, press W down when a picture is displayed full frame.
Page 108: Printing Multiple Pictures
Printing Multiple Pictures Display the PictBridge menu. Press the G button in the Pict- Bridge playback display (see Step 3 on page 86). Choose an option. Highlight one of the following options and press 2. • Select images for printing: Select pic- tures for printing.
Page 109 Select pictures or choose dates. If you chose Select images for printing or Print DPOF print order in Step 2, press 4 or 2 or rotate the multi selec- tor to highlight pictures. To select the current picture for printing, press 1. The picture will be marked with a Z icon and the number of prints will be set to 1;...
Page 110 Adjust print options. Press J to display PictBridge print options. Press 1 or 3 to highlight page size, border, or time stamp items and press 2 to display the options described on page 91; note that a warning will be displayed if the selected page size is too small for an index print.
Page 111 PictBridge Print Options Highlight a page size (only sizes supported by the current printer are listed) and press J to select and exit to the previous Page size menu (to print at the default page size for the current printer, select Use printer settings).
Page 112: Creating A Dpof Print Order: Print Set
Creating a DPOF Print Order: Print Set The DPOF print order option is used to create digital “print orders” for Pict- Bridge-compatible printers and devices that support DPOF. Press the G but- ton, select DPOF print order in the play- b a c k m e n u, a n d ch o o s e f r o m t h e following options: Press 4 or 2 or rotate the multi selec-...
Page 113: The Playback Menu
The Playback Menu To display the playback menu, press G and select the play- back menu tab (K). G button The playback menu contains the following options: Option Delete multiple images. Delete View movies and photos in Slide show a slide show. Rotate “tall”...
Page 114 Option Brighten shadows in dark or back-lit photos, creating a retouched copy that is D-Lighting saved separately from the unmodified original. Create small copies of select- Resize ed pictures. Create cropped copies of se- Crop lected pictures. Create copies of movies from which unwanted footage has Edit movie been trimmed.
Page 115: Selecting Multiple Images
Selecting Multiple Images Choosing the options listed below dis- plays an image selection dialog. Press 4 or 2 or rotate the multi selector to high- light pictures (only pictures to which the operation applies are available for selec- tion). • Delete > Delete selected images (0 69) •...
Page 116: Rotate Tall
Rotate Tall Choose whether to rotate “tall” (portrait-orientation) pictures for display during playback. Note that because the camera itself is already in the appropriate orientation during shooting, images are not rotated automatically during image review. “Tall” (portrait-orientation) pictures are automatically rotated for display in the camera monitor.
Page 117: D-Lighting
D-Lighting Applied to selected images, D-Lighting creates copies that have been processed to brighten shadows. Use to retouch dark or backlit photographs. Before Press 4 or 2 or rotate the multi selector to highlight an image (0 95) and press J to display the options shown at right.
Page 118: Resize
Resize Create small copies of selected photo- graphs. Select Choose size and choose a size from 1.1 M (1,280 × 856 pixels), 0.6 M (960 × 640 pixels), and 0.3 M (640 × 424 pixels), and then choose Select images. Press 4 or 2 or rotate the multi selector to highlight pictures (0 95) and press 1 or 3 to select or deselect.
Page 119: Crop
Crop Create a cropped copy of selected photo- graphs. Press 4 or 2 or rotate the multi selector to highlight a picture (0 95) and press J to display the image with the default crop shown in yellow. Use the controls below to choose a crop and save the copy.
Page 120: Edit Movie
Edit Movie Trim footage from movies to create edited copies. Select Choose start point or Choose end point. Choose from the following options: • Choose start point: Trim the opening footage. • Choose end point: Trim the closing foot- age. Select a movie.
Page 121 Trimming Movies Movies must be at least two seconds long. If a copy can not be created at the current playback position, the current position will be displayed in red in Step 4 and no copy will be created. The copy will not be saved if there is insufficient space available on the memory card.
Page 123: The Shooting Menu
The Shooting Menu To display the shooting menu, press G and select the shoot- ing menu tab (C, y, 1, or z). G button The shooting menu contains the following options: Option Reset shooting options Reset shooting options to default values. Choose how the camera Exposure mode sets shutter speed and...
Page 124 Option Adjust settings for differ- White balance ent types of lighting. Control the camera’s sen- ISO sensitivity sitivity to light. Choose how the camera Picture Control processes pictures. Custom Picture Create custom Picture Con- trols. Control Choose a color space for Color space new pictures.
Page 125: Reset Shooting Options
Option Turn face-priority AF on Face-priority AF or off. Control the built-in AF- Built-in AF assist assist illuminator. Flash Control flash output. compensation 1 Varies with lens (0 136). 2 The camera focuses on the subject in the center of the frame when 10 fps is selected for Electronic (Hi) or Slow motion is selected as the movie type.
Page 126: Exposure Mode
Exposure Mode The options in the exposure mode menu offer varying degrees of control over shutter speed and aperture. An automatic, “point-and-shoot” mode in which the h Scene auto camera not only chooses shutter speed and aperture selector but adjusts other settings to suit the subject (0 21). The camera sets shutter speed and aperture for optimal P Programmed auto...
Page 127 Shutter Speed and Aperture The same exposure can be achieved with different combinations of shutter speed and aperture. Fast shutter speeds and large apertures freeze moving objects and soften background details, while slow shut- ter speeds and small apertures blur moving objects and bring out background details.
Page 128: P Programmed Auto
P Programmed Auto In this mode, the camera automatically adjusts shutter speed and aperture for optimal exposure in most situations. This mode is recommended for snapshots and other situations in which you want to leave the camera in charge of shutter speed and aperture.
Page 129: S Shutter-Priority Auto
S Shutter-Priority Auto In shutter-priority auto, you choose the shutter speed while the camera automatically selects the aperture that will produce the optimal exposure. Use slow shutter speeds to suggest motion by blurring moving subjects, fast shutter speeds to “freeze” motion. Fast shutter speed ( Choose a shutter speed.
Page 130: A Aperture-Priority Auto
A Aperture-Priority Auto In aperture-priority auto, you choose the aperture while the camera automatically selects the shutter speed that will produce the optimal exposure. Large apertures (low f-numbers) reduce depth of field, blurring objects behind and in front of the main subject.
Page 131: M Manual
M Manual In manual exposure mode, you control both shutter speed and aperture. Choose shutter speed and aperture. Adjust shutter speed and aperture with reference to the exposure indica- tor (see below). Shutter speed is set by pressing W up for faster speeds and down for slower speeds: choose from values between 30 s and select “Bulb”...
Page 132 Long Time-Exposures (Manual Exposure Mode Only) Select the following shutter speeds for long time-exposures of moving lights, the stars, night scenery, or fireworks. • Bulb: The shutter remains open while the shutter-release button is held down. To prevent blur, use a tripod. •...
Page 133 Choose a shutter speed. Press W down until “Bulb” is selected for shutter speed. For a shutter speed of “Time”, select a remote control mode (0 53) after choosing the shut- ter speed. Open the shutter. Bulb: After focusing, press the shutter-release button all the way down.
Page 134: Image Quality
Image Quality Choose a file format and compression ratio for photographs taken in still image and Smart Photo Selector modes. Option File type NEF (RAW) JPEG fine JPEG JPEG normal JPEG basic NEF (RAW) + NEF/ JPEG JPEG fine Image Size Choose the size of photographs taken in still image and Smart Photo Selector modes.
Page 135 NEF (RAW)/NEF (RAW) + JPEG The option selected for image size does not affect the size of NEF (RAW) images. NEF (RAW) images can be viewed on the camera or using soft- ware such as Capture NX 2 (available separately; 0 158) or ViewNX 2 (supplied).
Page 136: Frame Rate
Frame Rate Choose a frame rate for slow motion movies (0 40). The faster the frame rate, the smaller the frame size. Option Frame size (pixels) 640 × 240 400 fps 1200 fps 320 × 120 * All figures are approximate. Slow motion movies will play back over a period of about 13.2 (400 fps) or 40 (1200 fps) times the recording time.
Page 137: Metering
Metering Choose how the camera sets exposure. Regardless of the option selected, metering is automatically adjusted to suit the scene when h Scene auto selector is selected for Exposure mode. The camera meters a wide area of the frame and adjusts for L Matrix contrast (tone distribution), color, composition, and subject distance, producing natural results in most situations.
Page 138: Autoexposure Lock
Autoexposure Lock Exposure lock is used to recompose photographs after metering exposure. It is most effective when used with center-weighted or spot metering (0 117) to frame off-center subjects that are much brighter or darker than their surroundings or to optimize exposure for an object other than your main subject.
Page 139: White Balance
White Balance White balance ensures that colors are unaffected by the color of the light source. Auto white balance is recommended for most light sources, but other values can be selected if necessary according to the type of source. Regardless of the option selected, white balance is automatically adjusted to suit the scene if h Scene auto selector is selected for Exposure mode.
Page 140: Fine-Tuning White Balance
Fine-Tuning White Balance Options other than Preset manual can be fine-tuned as follows: Display fine-tuning options. Highlight an option other than Preset manual and press 2 to display the fine-tuning options shown at right. Fine-tune white balance. Use the multi selector to fine-tune white balance. Increase blue White Balance Fine Tuning The colors on the fine-tuning axes are relative, not absolute.
Page 141: Preset Manual
Preset Manual Preset manual is used to record and recall custom white balance settings for shooting under mixed lighting or to compensate for light sources with a strong color cast. Light a reference object. Place a neutral gray or white object under the lighting that will be used in the final photograph.
Page 142 Measure white balance. When the camera is ready to measure white balance, a flashing L will be displayed. Before the indicator stops flashing, frame the reference object so that it fills the display and press the shutter-release button all the way d o w n .
Page 143 Auto Power Off White balance measurement will end without a new value being acquired if no operations are performed for the time selected for Auto power off in the setup menu (0 151; the default is 30 s). Preset White Balance The camera can store only one value for preset white balance at a time;...
Page 144: Iso Sensitivity
ISO Sensitivity “ISO sensitivity” is the digital equivalent of film speed. The higher the sensitivity, the less light needed to make an exposure, allowing faster shutter speeds or smaller apertures, but the more likely the image is to be affected by “noise” in the form of ran- domly-spaced bright pixels, fog, or lines.
Page 145: Picture Control
Picture Control Choose how the camera processes photographs. Regardless of the option selected, the camera automatically chooses Picture Controls to suit the scene when h Scene auto selector is selected for Exposure mode. Standard processing for balanced results. Recom- Q Standard mended in most situations.
Page 146 Picture Controls using the Custom Picture Control option in the shooting menu (0 129). If desired, custom Picture Con- trols can be saved to a memory card and copied to other Nikon 1 J1 cameras or loaded into compatible software (0 130).
Page 147 Picture Control Settings Choose from options between –2 and +2 to reduce or exaggerate the effect of the selected Picture Control (note that this resets all manual adjustments). For Quick adjust example, choosing positive values for Vivid makes pic- tures more vivid. Not available with Neutral, Mono- chrome, or custom Picture Controls.
Page 148 “A” (Auto) Results for auto sharpening, contrast, and saturation vary with expo- sure and the position of the subject in the frame. The Picture Control Grid Pressing W up in Step 2 displays a Picture Control grid showing the contrast and satu- ration for the selected Picture Control in rela- tion to the other Picture Controls (only contrast is displayed when Monochrome is...
Page 149: Custom Picture Control
Custom Picture Control The Picture Controls supplied with the camera can be modified and saved as custom Picture Controls. Edit/Save To create a custom Picture Control, select Edit/save and follow the steps below. Select a Picture Control. Highlight an existing Picture Control and press 2, or press J to proceed to Step 3 to save a copy of the high- lighted Picture Control without fur-...
Page 150: Load From/Save To Card
Capture NX 2 can be copied to a memory card and loaded into the camera, or custom Picture Controls created with the camera can be copied to the memory card to be used in other Nikon 1 J1 cameras and compatible software and then deleted when no longer needed.
Page 151: Color Space
DCF, select the appropriate color space manually. For more informa- tion, see the documentation provided with the application or device. Nikon Software ViewNX 2 (supplied) and Capture NX 2 (available separately) automati- cally select the correct color space when opening photographs created...
Page 152: Active D-Lighting
Active D-Lighting Active D-Lighting preserves details in highlights and shadows for natural contrast. Use with high contrast scenes such as a brightly lit outdoor view framed in a door or window or a sub- jects in the shade on a sunny day. It is most effective when used with Matrix metering (0 117).
Page 153: Long Exposure Nr
Long Exposure NR Photographs taken at slow shutter speeds are automatically pro- cessed to reduce “noise” (bright spots, randomly-spaced bright pixels, or fog), slightly increasing recording times. Selecting On increases the amount of noise reduction performed at shutter speeds slower than 1 s and increases the time required to record images by roughly 1.5 to 2 times.
Page 154: Movie Sound Options
Movie Sound Options Adjust movie sound recording settings for the built-in micro- phone. Microphone Select Microphone off to disable sound recording. Selecting any other option enables recording and sets the microphone to the selected sensitivity. The 2 Icon Movies recorded with the microphone off are indicated by a 2 icon in full-frame and movie playback.
Page 155: Interval Timer Shooting
Interval Timer Shooting Take photographs automatically at preset intervals. Before Shooting Before proceeding, check that the clock is set correctly (0 18, 154) and then take a test shot at current settings and view the results in the monitor. Use of a tripod is recommended. To ensure that shooting is not inter- rupted, be sure the battery is fully charged or use an optional EH-5b AC adapter and EP-5C power connector.
Page 156: Vibration Reduction
Interval Timer Photography A warning will be displayed if the camera is unable to start interval timer photography at current settings (for example, when “Bulb” is selected for shutter speed). While interval timer photography is in progress, settings can not be adjusted and the camera will not turn off automatically (0 17).
Page 157: Focus Mode
Focus Mode Choose how the camera focuses (note that focus mode selection is not available in h Scene auto selector mode; 0 21, 106). Auto-select AF: The camera automatically selects AF-S if the subject is AF-A stationary, AF-C if it is moving. Single AF: For stationary subjects.
Page 158 The AF-Assist Illuminator If the subject is poorly lit, the AF-assist illumi- nator will light automatically to assist the autofocus operation when the shutter- release button is pressed halfway. The AF- assist illuminator is available in still image, Smart Photo Selector, and Motion Snapshot modes and lights only if: •...
Page 159 Getting Good Results with Autofocus Autofocus does not perform well under the conditions listed below. The shutter release may be disabled if the camera is unable to focus under these conditions, or the focus area may be displayed in green and the camera may sound a beep, allowing the shutter to be released even when the subject is not in focus.
Page 160: Manual Focus
Manual Focus Manual focus can be used when autofocus does not produce the desired results. Highlight Manual focus. Press 1 or 3 to highlight Manual focus (0 137). Display the manual focus guides. Press J to magnify the view at the center of the frame and display man- ual focus guides.
Page 161 Focus. Rotate the multi selector until the sub- ject is in focus. Rotate the multi selec- tor clockwise to increase the focus d i s t a n c e , c o u n t e r c l o c k w i s e t o decrease;...
Page 162: Af-Area Mode
AF-Area Mode Choose how the focus area for autofocus is selected. Auto- The camera automatically detects the subject and selects the focus area. area Press J to view the focus area selection display, then use the multi selector to position the focus area over your subject Single- and press J;...
Page 163: Focus Lock
Focus Lock Focus lock can be used to change the composition after focusing on the subject in the center of the frame, allowing you to focus on a subject that will not be in the center of the final composi- tion.
Page 164 Lock focus. With the shutter-release button pressed halfway, press 1 (A) to lock both focus and exposure (an AE-L indi- cator will be displayed; 0 118). Focus will remain locked while 1 (A) is pressed, even if you later remove your finger from the shutter-release but- ton.
Page 165: Face-Priority Af
Face-Priority AF Choose On to enable face-priority AF (0 23). Built-in AF Assist If On is selected, the built-in AF-assist illu- minator will light to illuminate poorly-lit subjects in still image, Smart Photo Selec- tor, or Motion Snapshot mode if: •...
Page 166: Flash Compensation
Flash Compensation Flash compensation alters flash output from the level suggested by the camera, changing the brightness of the main subject rel- ative to the background. Choose from values between –3 EV (darker) and +1 EV (brighter) in increments of EV;...
Page 167: The Setup Menu
The Setup Menu To display the setup menu, press G and select the setup menu tab (B). G button The setup menu contains the following options: Option Reset setup options Format memory card Slot empty release lock Welcome screen Monitor brightness Grid display Sound settings Description...
Page 168 Option Auto power off Remote on duration Assign AE/AF-L button Shutter button AE lock HDMI device control Flicker reduction Reset file numbering Time zone and date Set the camera clock. Language Auto image rotation Firmware version Description Choose the auto power off delay.
Page 169: Reset Setup Options
Reset Setup Options Select Yes to reset all setup menu options other than Flicker reduction, Time zone and date and Language to default val- ues. Format Memory Card Select Yes to format the memory card. Note that this permanently deletes all data on the card, including protected images; before proceeding, be sure to copy important pictures and other data to a computer (0 79).
Page 170: Welcome Screen
Welcome Screen If On is selected, the message at right will be displayed whenever the camera is turned on. Monitor Brightness Highlight Monitor brightness and press 2. Brightness can then be adjusted by pressing 1 or 3; choose higher values for increased brightness, lower values for reduced brightness.
Page 171: Sound Settings
Sound Settings Highlight items and press 2 to select or deselect. If Autofocus/self-timer is selected, a beep will sound when the camera focuses and during self-timer and remote control photography; to mute the beep, remove the check from this item. Select Shutter to play a sound when the shutter is released, or remove the check from this item to mute the shutter.
Page 172: Remote On Duration
Remote on Duration Choose how long the camera will remain active while waiting for a signal from the remote control (0 53). Choose shorter delays to reduce the drain on the battery. Note that remote control mode must be reselected once the timer has expired. Assign AE/AF-L Button Choose whether the 1 (A) button locks both focus and exposure (AE/AF lock),...
Page 173: Flicker Reduction
Flicker Reduction Reduce flicker and banding in the displays and in movies while shooting under fluorescent or mercury-vapor lighting. Choose a frequency which matches that of the local AC power supply. Flicker Reduction If you are unsure as to the frequency of the local power supply, test both options and choose the one that produces the best results.
Page 174: Time Zone And Date
Time Zone and Date Change time zones, set the camera clock, choose the date display order, or turn daylight saving time on or off (0 18). Choose a time zone. The camera clock is automatically set Time zone to the time in the new time zone. Date and time Set the camera clock.
Page 175: Auto Image Rotation
Auto Image Rotation Photographs taken while On is selected contain information on camera orientation, allowing them to be rotated automatically during playback or when viewed in ViewNX 2 or Capture NX 2 (available separately; 0 158). The following orientations are recorded: Landscape (wide) orientation...
Page 177: Technical Notes
Technical Notes Read this chapter for information on compatible accessories, cleaning and storing the camera, and what to do if an error mes- sage is displayed or you encounter problems using the camera. Optional Accessories At the time of writing, the following accessories were available for your camera.
Page 178 Note: Use the latest versions of Nikon software; see the web- sites listed on page xvii for the latest information on sup- ported operating systems. At default settings, Nikon...
Page 179 Body Cap BF-N1000: The body cap keeps the dust shield free Body caps of dust when a lens is not in place. Tripod Tripod Adapter TA-N100: Prevents large lenses from coming into contact with the tripod head when the camera is adapters mounted on a tripod.
Page 180: Approved Memory Cards
Approved Memory Cards The following cards have been tested and approved for use in the camera. Cards with class 6 or faster write speeds are recom- mended for movie recording. Recording may end unexpectedly when cards with slower write speeds are used. SD cards SanDisk 2 GB...
Page 181: Attaching A Power Connector And Ac Adapter
Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connec- tor and AC adapter. Ready the camera. Open the battery-chamber (q) and power connector (w) covers. Insert the EP-5C power connector. Be sure to insert the connector in the orientation shown, using the connec- tor to keep the orange battery latch pressed to one side.
Page 182 Connect the AC adapter. Connect the AC adapter power cable to the AC socket on AC adapter (e) and the EP-5C power cable to the DC socket (r). A P icon is displayed in the monitor when the camera is powered by the AC adapter and power connector.
Page 183: Storage And Cleaning
Storage and Cleaning Storage If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area.
Page 184: Caring For The Camera And Battery: Cautions
Caring for the Camera and Battery: Cautions Do not drop: The product may malfunction if subjected to strong shocks or vibration. Keep dry: This product is not waterproof, and may malfunction if immersed in water or exposed to high levels of humidity. Rusting of the internal mechanism can cause irreparable damage.
Page 185 Cleaning: When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the cam- era at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the camera thoroughly.
Page 186 Moiré: Moiré is an interference pattern created by the interaction of an image containing a regular, repeating grid, such as the pattern of weave in cloth or windows in a building, with the camera image sensor grid. In some cases, it may appear in the form of lines. If you notice moiré in your photographs, try changing the distance to the subject, zooming in and out, or changing the angle between the subject and the camera.
Page 187 • Used batteries are a valuable resource; recycle in accord with local reg- ulations. Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or Nikon-authorized service representative once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services).
Page 188: Defaults
Defaults Defaults for the options in the playback, shooting, and setup menus may be found on pages 93, 103, and 147, respectively. Defaults for other settings are listed below. Option Focus area (0 142) Flexible program (0 108) Autoexposure lock (0 118) Focus lock (0 143) Self-timer (0 53) Exposure compensation (0 56)
Page 189: Memory Card Capacity
Memory Card Capacity The following table shows the number of pictures or amount of movie footage that can be stored on a 16 GB Toshiba R95 W80MB/s UHS-I SDHC card at different image quality, size, or movie settings. All figures are approximate; file size varies with the scene recorded.
Page 190 Slow Motion Movies Frame rate (0 116) 400 fps 1200 fps * Up to five seconds of slow motion footage can be recorded in a single clip. Playback length is about 13.2 (400 fps) or 40 (1200 fps) times the recorded length.
Page 191: Troubleshooting
Troubleshooting If the camera fails to function as expected, check this list of com- mon problems before consulting your retailer or Nikon repre- sentative. Display The monitor is off: • The camera is off (0 17) or the battery is exhausted (0 11, 20).
Page 192: Shooting (All Exposure Modes)
Shooting (All Exposure Modes) The camera takes time to turn on: Delete files or format the memory card. The shutter-release is disabled: • The battery is exhausted (0 11, 20). • The memory card is locked (0 14) or full (0 13, 20). •...
Page 193: Shooting (P, S, A, And M Modes)
No photo taken when remote control shutter-release button is pressed: • Replace battery in remote control (0 158). • Choose a remote control mode (0 53). • The remote control standby timer has expired (0 152). • The remote is not pointed at the camera or the infrared receiver is not visible (0 2, 54).
Page 194: Movies
Movies Cannot record movies: The movie-record button can not be used to record movies in still image, Smart Photo Selector, or Motion Snapshot mode (0 25, 33, 47). No sound is recorded for movies: • Microphone off is selected for Movie sound options > Microphone (0 134).
Page 195: Miscellaneous
(available separately), disconnect and reconnect the adapter and turn the camera on again. If the problem persists after the battery has been removed and replaced, contact your retailer or Nikon-authorized service representative. The date of recording is not correct: Set the camera clock (0 18, 154).
Page 196: Error Messages
Error Messages This section lists the error messages that appear in the display. Message Rotate the zoom ring to extend the lens. Check lens. Pictures can only be taken when a lens is attached. Cannot take pictures. Insert fully-charged battery. Start-up error.
Page 197 Solution images if you reduce image quality or size. sists, the card may be damaged. Con- tact a Nikon-authorized ser vice representative. 13, 160 13, 160 25, 33,...
Page 198 Contact a Nikon-authorized service representa- tive. Press the shutter-release button. Con- tact a Nikon-authorized service repre- sentative if the problem persists or re- occurs frequently. 109, 110, 109, 110, 109, 111 —...
Page 199 Message An error has occurred in the internal Contact a Nikon-authorized service circuitry. Contact a representative. Nikon-authorized service center. The camera’s internal temperature is high. Wait for the camera to cool. The camera will now turn off. Memory card contains To view pictures, insert a memory card no images.
Page 200: Specifications
Media File system Digital camera with interchangeable lenses Nikon 1 mount Approx. 2.7× lens focal length (Nikon CX format) 10.1 million 13.2 mm × 8.8 mm CMOS sensor Still images (still image and Smart Photo Selector modes, aspect ratio 3 : 2) •...
Page 201 Shooting modes C still image (3 : 2), y Smart Photo Selector (3 : 2), 1 movie (HD 16 : 9, slow motion 8 : 3), z Motion Snapshot (16 : 9) Shutter Electronic shutter Type Speed 16,000 optional ML-L3 remote control) Synchronizes with shutter at X= Flash sync speed Release...
Page 202 Focus Autofocus Lens servo AF-area mode Focus area Focus lock Face-priority AF Flash Built-in flash Guide Number (GN) Control Mode Flash compensation Flash-ready indicator White balance Hybrid autofocus (phase detection/contrast- detect AF); AF-assist illuminator • Autofocus (AF): Single AF (AF-S); continuous AF (AF-C);...
Page 203 Movie Metering TTL metering using image sensor • Matrix Metering method • Center-weighted: Meters 4.5 mm circle in center of • Spot: Meters 2 mm circle centered on selected Frame size (pixels)/ HD movies recording rate • 1,920 × 1,080/60i (59.94 fields/s •...
Page 204 • Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.
Page 205 AC 100–240 V, 50–60 Hz, 0.2 A DC 8.4 V/0.6 A Rated output Supported batteries Nikon EN-EL20 rechargeable Li-ion batteries Charging time Approx. 2 hours at an ambient temperature of 25 °C/77 °F when no charge remains Operating temperature 0–40 °C/+32–104 °F Dimensions (W ×...
Page 206 Diaphragm Aperture range Filter-attachment size Dimensions Weight Specifications subject to change without notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain. 1 mount lens 10–30 mm f/3.5–5.6 12 elements in 9 groups (including 3 aspherical elements) 77°–29°...
Page 207 Focal length scale Retractable lens barrel button 1 NIKKOR lenses are exclusively for Nikon 1 interchangeable lens format digital cameras. The angle of view is equivalent to a 35 mm format lens with a focal length about 2.7 × longer. They sup- port normal and active vibration reduction and vibration reduc- tion off (0 136).
Page 208 Lens Care • When using an optional lens hood, do not pick up or hold the lens or camera using only the hood. • Keep the CPU contacts clean. • Use a blower to remove dust and lint from the lens surfaces. To remove smudges and fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care...
Page 209 High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respec- tive holders.
Page 210: Battery Life
• Taking NEF (RAW) photographs • Slow shutter speeds • Using vibration reduction mode with VR lenses To ensure that you get the most from rechargeable Nikon EN-EL20 batteries: • Keep the battery contacts clean. Soiled contacts can reduce battery performance.
Page 211: Index
Index Symbols C (Still image mode) ...21 y (Smart Photo Selector mode) .31 1 (Movie mode) ...37 z (Motion Snapshot mode) ...45 h (Scene auto selector) ... 21, 106 c (Portrait) ...21 d (Landscape) ...21 e (Close up) ...21 f (Night portrait) ...21 Z (Auto) ...21 P (Programmed auto) ...106, 108 S (Shutter-priority auto) ...106, 109...
Page 212 Brightness ...127 Buffering ... 32, 46 Built-in AF assist ... 138, 145 Built-in Flash ... 58 Bulb ...112 Burst ... 26 Calendar ... 67, 71 Calendar playback ... 67 Capture NX 2 ...115, 130, 158 CEC ... 85 Center-weighted (Metering) ...117 Charging a battery ...
Page 213 Multi selector ...7 NEF ... 114, 115 NEF (RAW) ... 114, 115 Neutral ...125 Night portrait ... 21 Nikon Transfer 2 ... 79 Photo information ...5, 63 PictBridge ...86, 189 Picture Control ... 125, 129 Playback ... 28, 63 Playback menu ... 93 Playback zoom ...
Page 214 Programmed auto ... 106, 108 Protect ... 96 Quick adjust ...127 Quick-response remote ... 53 Rating ... 70, 96 Rear-curtain sync ... 58 Red-eye reduction ... 58 Remote control ... 53 Remote on duration ...152 Removing the lens from the camera Reset file numbering ...153 Reset setup options ...149 Reset shooting options ...105...
Page 215 Welcome screen ... 150 White balance ... 119 Wind noise reduction ... 134 Zoom guide ...22 Zoom ring ... 22, 187...
Page 216 No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. SB1I02(11) 6MVA1411-02...

Nikon 1 J1 Reference Manual

Quick Links

Related Manuals for Nikon 1 J1

Summary of Contents for Nikon 1 J1

Table of Contents