Calibrating The Electronic Compass - Nikon 1 aw1 Reference Manual

Calibrating the Electronic Compass

If the electronic compass does not give
the correct heading, calibrate it as
described below. The lens must be
attached when the compass is calibrated.
1 Select Compass correction.
In the setup menu, highlight Com-
pass correction and press 2.
2 Calibrate the compass.
Move the camera in a figure eight while rotating it as shown
below.
The setup menu will be displayed
when calibration is complete. If cali-
bration fails, the message shown at
right will be displayed. Try calibrating
the compass outdoors.
O
114