Altitude/Depth Options
Adjust settings for the altimeter and depth gauge.
Altimeter/Depth Gauge
Choose whether the display shows the altitude or depth (0 57,
103).
Altitude/Depth Correction
Select Alt./depth correction to correct altitude or depth using
one of the following methods (corrected values are indicated by
an asterisk).
Enter a manual altitude or depth
correction. Press 4 or 2 to high-
Correct
light digits and 1 or 3 to
manually
change. Press J to save changes
and exit.
The camera will display an alti-
tude correction based on current
location data (0 104); highlight
Yes and press J to accept the
suggested value. This option is
Use location
data
not available when location data
are not available (for example,
when No is selected for Location data > Record location
data in the setup menu; 0 104) or when Depth gauge is
selected for Altimeter/depth gauge.
To restore the uncorrected value,
highlight Yes and press J.
Reset
Altitude/Depth Units
Choose whether the altitude and depth are displayed in meters
(m) or feet (ft).
g
196