Removing The Fixing Motor - Canon imageRUNNERC1022 Service Manual

2) Remove the fixing assembly.(page 10-8)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-9)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]
7) Remove the Upper Frame Unit.(page 11-20)Reference [Removing the
Upper Frame Unit]
8) Remove the Reversal Unit.(page 9-29)Reference [Removing the Re-
versal Unit]
9) Remove the Fixing Drive Unit.(page 10-12)Reference [Removing the
Fixing Drive Unit]

10.4.4.2 Removing the Fixing Motor

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Disconnect the 3 connectors [1].
2) Remove the fixing driver PCB [1].
- 3 screws [2]
[2]
[2]
3) Free the harness [1] from the harness guide [2].
4) Remove the screw [3] to pull out the sensor and the attaching plate [4].
[1]
F-10-41
[1]
F-10-42
0018-9695
5) Disconnect the connector [1].
6) Move the harness guide [1] in the direction of the arrow [A] to remove the
hook [2] in the direction of the arrow [B].
7) Remove the harness guide [1].
[1] [2]
[3] [4]
F-10-43
[1]
F-10-44
Chapter 10
10-15