Power Station Cover; Before Removing The Electrical Components Cover; Removing The Electrical Components Cover; Controller Box - Canon imageRUNNERC1022 Service Manual

Chapter 11
6) Remove the left upper front inner cover [1].
[1]
7) Remove the 2 screws [1].
8) Move the delivery tray cover [2] in the order of arrow directions [A] and
then [B], and release the 2 claws [3] to remove.
[3]

11.5.7 Power Station Cover

11.5.7.1 Before Removing the Electrical Components
Cover
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
11-16
[1]
F-11-30
F-11-31
[1]
[A]
[B]
[2]
[3]
[2]
F-11-32
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]

11.5.7.2 Removing the Electrical Components Cover

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the Electrical Components Cover [1].
- 12 screws [2]
- 1 terminal [3]
[1]

11.5.8 Controller Box

11.5.8.1 Before Removing the Controller Box

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-12)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 11-14)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 11-12)Reference [Removing the Right
Cover]
5) Remove the Electrical Components Cover.(page 11-16)Reference [Re-
moving the Electrical Components Cover]

11.5.8.2 Removing the Controller Box

imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER
C1030 / Color imageRUNNER C1030iF
1) Remove the following parts.
- 2 flat cables [1]
- 2 clamps [2]
- edge saddle [3]
- 10 connectors [4]
- 2 clamps [5] (only of the machine with FAX)
- connector [6] (only of the machine with FAX)
0019-5925
[2]
F-11-33
0019-5926
[2]
[3]
[2]
0019-5930
0020-3286