The machine is equipped with counters that indicate the counts of output according to types of printers.
These counters are indicated in response on a press on the Check key on the control panel, and they operate as follows(as set at time of shipment from the factory):
Model
Counter 1
100V
*1
type1
(old system)
100V
*1
type2
(new sysytem)
100V
*1
type4
(new system)
120V
*2
230V
*3
(black-and-white/
230V
*4
type1
(old system)
230V
*5
type2
(new system)
230V
*6
Guide to Notations
large:large-size paper(longer than 364 mm in feed direction;count increased by 1)
small:small-size paper(364 mm in feed length or shorter)
total:all(C+P;count increased by 1)
duplex:duplexing(in auto duplexing;count increased by 1)
- 3-digit number in the counter column indicates the setting value in the following service mode.
COPIER>OPTION>USER>COUNTER1 to 6
- From counter 2 to 6 can be changed in service mode COPIER>OPTION>USER>COUNTER
*1: 100V (JAPAN)
*2: 120V (America,Canada,South America 120V;region)
*3: 230V (Singapore,HK,Korea,China,South America 230V;region)
*4: 230V (EU)
*5: 230V (EU)
*6: 230V (Australia,Newzealand)
*: by default,not indicated;may be changed in service mode.