Setting Procedure - Canon imageRUNNERC1022 Service Manual

Table of Contents

Advertisement

12.1.7 Setting Procedure

Color imageRUNNER C1030 / Color imageRUNNER C1030iF
Confirmation and preparation in advance
To monitor a device with e-Maintenance/ imageWARE Remote, the following settings are required.
(1) Advance confirmation
Confirm with the UGW administrator that the device to be monitored with e-Maintenance/ imageWARE Remote is registered in the UGW.
(2) Advance preparations
Interview the user's system administrator in advance to find out the following information about the network.
Information item 1
IP address settings
- Automatic setting : DHCP, RARP, BOOTP
- Manual setting : IP address, subnet mask and gateway address to be set
Information item 2
Is there a DNS server in use?
If there is a DNS server in use, find out the following.
- Primary DNS server address
- Secondary DNS server address
Information item 3
Is there a proxy server?
If there is a proxy server in use, find out the following.
- Proxy server address
- Port No. for proxy server
Information item 4
Is proxy server authentication required?
If proxy server authentication is required, find out the following.
- User name and password required for proxy authentication
(3) Network settings
Based on the results of the information obtained in (2) Advance preparations, make the device network related settings in accordance with the following procedures.
1) Displaying the Additional function screen
a. Press [Additional Func.] button.
b. When a system management department ID and system management password are set up, enter the System Manager ID and System Password to perform a
log-in.
2) Setting IP address-related items
a. Select [Additional Func.] > [System Management Set.] > [Network Settings] > [TCP/IP Settings] > [IPv4 Settings] > [IP Address Settings].
b. Set the IP address based on the result obtained in "(2) Advance preparations - Information item 1".
- Select the setting method of IP address
<In case of automatic setting>
- Select [DHCP], [RARP] or [BOOTP] and press [OK] button.
F-12-33
Chapter 12
0025-6391
12-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner c1030Color imagerunner c1030 seriesColor imagerunner c1022 seriesColor imagerunner c1022Color imagerunner c1022iColor imagerunner c1030 ... Show all

Table of Contents