Step 3 - Tunturi Platinum Pro User Manual

Handlebar
1. Run the two hand pulse wires (26)
into the hole in the handle bar
mounting plate and out through the g plate and out through the
hole in the console plate. e console plate.
2. Install the Handle Bar (3) onto the e Handle Bar (3) onto the
Upright tube (2) with two 5/16" x ube (2) with two 5/16" x
5/8" Hex Head bolts (51), two 5/16" Head bolts (51), two 5/16"
x 18mm Flat Washers (72) and two Flat Washers (72) and two
5/16" Split Washers (103) being it Washers (103) being
careful not to pinch the hand pulse ot to pinch the hand pulse
wires.
6

Step 3: