Adjusting The Viewfinder Focus And Screen; Using The Bkw-401 Viewfinder Rotation Bracket - Sony PMW-320K Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PMW-320K:
Table of Contents

Advertisement

To detach the viewfinder barrel
1
Push the clip on the bottom to release.
2
Flip up the viewfinder barrel.
3
Slide the knob on the top to the opposite
side of the viewfinder barrel.
4
Detach the viewfinder barrel by
horizontally sliding it.
To reverse the display (image/text indication)
horizontally
By setting the MIRROR switch on the rear panel
of the viewfinder to L/R, you can reverse the
picture and other information displayed in the
viewfinder horizontally.
38
Attaching the Viewfinder
Adjusting the Viewfinder Focus
and Screen
To adjust the viewfinder focus
Turn the diopter adjustment ring until the
viewfinder image is sharpest.
Diopter adjustment ring
You can also attach a commercially available
protection filter, close-up lens, etc. that is 52 mm
in diameter.
To adjust the viewfinder screen
Adjust the brightness, contrast, and peaking of the
viewfinder screen with the controls shown below.
1 PEAKING control
2 CONTRAST control
3 BRIGHT control
Using the BKW-401 Viewfinder
Rotation Bracket
By fitting an optional BKW-401 Viewfinder
Rotation Bracket, you can rotate the viewfinder
out of the way so that your right leg does not hit

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pmw-320lSpmw-320l

Table of Contents