Compaq ProLiant DL380 Quick Install Manual page 91

5-26 Compaq ProLiant Clusters for SCO UnixWare 7 U/300 Quick Install Guide for the Compaq ProLiant DL380
Table 5-11
ServerNet I Panic Messages
Messages
avt_define_q: invalid interrupt
queue size: nnnn
Invalid parameters on
ServerNet I Request
Invalid status on ServerNet I
Request: 0xnnnnnnnn
bte_error: Invalid BTE command
descriptor
intr_init: qintr_map failed
ioint: invalid ioaddr 0xnnnnnnnn
ship_init: physmap failed
PHYS_TO_VIRT: invalid address
0xnnnnnnnn
allocSNdev: out of sndev table
space
snetConfig: bad cmd n
snetOpen: invalid mode
0xnnnnnnnn
continued
Description
These messages are all SPAD
(software) errors.
User Action
If possible, take crash dump for
analysis by product support
personnel. Reboot the node into
the cluster.