Compaq ProLiant DL380 Quick Install Manual page 44

13. Page down to the
Embedded - Compaq Automated Server Recovery
14. Verify that the following items are disabled:
G
Software Error Recovery
G
Standby Recovery Server
G
UPS Shutdown
Use the arrow keys to select the options and the Enter key to modify
them as necessary.
15. Page down to
Embedded-Compaq Integrated Dual Channel Wide Ultra2 SCSI
Controller (Port2).
G
Select
Controller Order,
G
Select and press F10. The
First
G
Press Enter to accept the changes.
16. Press F10 to exit the
configuring your computer
17. Use the arrow keys to select
The
Step 5: Save and exit
18. Select
Save the configuration and restart the computer
window displays.
Reboot
19. Press Enter. The
Array Configuration Utility
creen displays.
Wizard s
20. Click Next. The
Select a configuration
highlighted by default.
21. Click Next to select
22. Click Next. The
Configuration Wizard Finished
23. Click the Save Configuration Now button. A
window displays.
Utility
à
24. Select
Controller Exit
Wait while the system partition installation completes. Wait while the
server reboots and sets up hardware. After two reboots,
window displays.
Path
and then press Enter.
Configuration Changes
Step 3: View or edit details
window displays.
Step 5: Save and exit
window displays.
loads and an
screen displays with
. A
RAID 0 Configuration Preview
screen displays.
from the menu bar.
Installing Cluster Software 3-5
entry.
screen displays.
window. The
Steps in
, and then press Enter.
, and then press Enter. A
Unconfigured Controller
RAID 0
screen displays.
Compaq Array Configuration
SmartStart-Manual