Using Wi-Fi Direct - Zte cricket Prelude 2 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Add a Wi-Fi network

You can add a Wi-Fi network if the network does not broadcast its name

(SSID) or add a Wi-Fi network when you are out of range .

To connect to a secured network, you first need to get the security details

from the network's administrator .

1 . From the home screen, tap the Menu key > System settings > Wi-Fi .

2 . Slide the Wi-Fi switch to the On position .

3 . Tap

at the bottom .

4 . Enter the network SSID (name) . If necessary, enter security or other network

configuration details .

5 . Tap Save .

Forget a Wi-Fi network

You can make your phone forget about the details of a Wi-Fi network that

you added . For example, if you don't want the phone to connect to it

automatically or if it is a network that you no longer use .

1 . From the home screen, tap the Menu key > System settings > Wi-Fi .

2 . Slide the Wi-Fi switch to the On position .

3 . Tap the Wi-Fi network name and then tap Forget .

CONNECTING TO NETWORKS AND DEVICES

Adjust advanced Wi-Fi settings

1 . From the home screen, tap the Menu key > System settings > Wi-Fi .

2 . Tap the Menu key > Advanced to adjust the following settings .

• Network notification: Get notifications in the status bar when Wi-Fi is on

and an open network is available .

• Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi on in sleep mode .

• Scanning always available: Let Google's location service other apps

scan for network, even when Wi-Fi is off .

• Avoid AP without Internet: Don't use Wi-Fi network unless it has Internet

connection .

• Install certificates: Install certificates from the memory card .

• Wi-Fi optimization: Minimize battery usage when Wi-Fi is on .

• MAC address: Check the MAC address .

• IP address: Check the phone's IP address .