Using Wi-Fi Direct - Zte N861 User Manual

Using Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to connect to each other
without the need for wireless access points (hotspots).
NOTE: Activating this feature will disconnect your current Wi-Fi
network connection.
1. Touch the Home Key > Menu Key > System settings >
More.
2. Tick the Wi-Fi direct check box to turn on Wi-Fi direct.
3. Your phone will search for other devices enabled with Wi-Fi
direct connections. Touch Wi-Fi direct settings to see all
available devices.
4. Touch a device name to begin the connection process.
NOTE: The target device must also have Wi-Fi Direct service
activated and running before it can be detected by your
phone.
5. Touch Connect.
The other device will receive a Wi-Fi Direct connection
prompt and need to accept the request for connection.
NOTE: You can touch the field below Wi-Fi protected setup
and change the WPS connection method: Push button
(recommended) or PIN number.
6. Once connected the device is displayed as "Connected" in
the Wi-Fi Direct devices list.
48