Airstream Basecamp 2007 Owner's Manual page 93

Starting Your Air Conditioner- Digital Control
Turbo
High
Fan Speed
Timer
Low
Auto
MODE
NOTE: When the air conditioner is off, the display will show the current room tempera-
ture.
1. Press POWER to turn on air conditioner.
NOTE: When air conditioner is turned on for the first time after it is plugged in, it
will display the default settings: Cool mode, Turbo fan speed, 72°F (22°C). When it is
turned on at all other times, it will default to the previous settings.
2. Select mode. See "Mode."
3. Select fan speed. See "Fan Speed."
4. Set temperature. See "Temperature."
Mode
1. Press MODE until you see the indicator light come on for the desired setting.
2. Choose Cool, Fan Only or Power Saver.
Cool-Cools room. You can select fan speed by pressing FAN SPEED. You can then
adjust the temperature by pressing the up or down arrow buttons.
Fan Only-Only the fan runs. You can select the fan speed by pressing FAN SPEED,
but you cannot adjust the Temperature control setting. The display shows the current
+
70
TEMP
Filter
Hold to Reset
Cool
Fan Only Power Saver
room temperature.
Power Saver-fan and compressor run only when cooling is needed. Compressor re-
starts in 3 minutes after the unit stops. Compressor will not stop running for the first 6
minutes after restarting unless unit is turned off.
NOTE: Auto fan speed cannot be selected in Fan Only mode.
Fan Speed
1. Press FAN SPEED until you see the indicator light for the desired setting.
2. Choose Turbo, High, Low or Auto.
Turbo-for maximum cooling.
High-for normal cooling.
Low-for sleeping comfort.
Auto-automatically controls fan speed depending on current
room temperature and temperature control setting
NOTE: Auto fan speed cannot be selected in Fan Only mode.
NOTE: After 3 seconds, display will show the current room temperature.
Filter Reset
1. When FILTER Indicator light glows, remove air filter and clean or replace air filter.
See "Cleaning the Air Filter"
2. Replace air filter
3. Press and hold FILTER after replacing the air filter.
H - 2
APPLIANCES
Cool
Fan Only Power Saver
MODE
Turbo
High
Fan Speed
Low
Auto
H
Filter
Hold to Reset