®
Invacare
- STORM
·
Checked to ensure that the plug is now firmly in its socket. If not, repeat the previous operation.
·
Refit the parts in reverse order.
·
Check all vehicle functions.
8.6.1
Installing cables
Note
Pay attention to chapter 8.6.2 if a type B lifter column is installed.
Requirements:
· 4 mm Allen key
· oblique pliers
· cable ties
·
Remove the rear and the centre cover as described in chapters 8.1.1 and 8.1.2 .
·
In the case of the lifter cabling, also remove the front cover as described in chapter 8.1.3.
4
Lifter column type A
electrically adjustable
SERVICE MANUAL
Lifter column type B
electrically adjustable
65