SERVICE MANUAL
8
Repair work
CAUTION!
Danger of injury and damage to property, if the maximum speed reduction on a
wheelchair with a lifter does not function correctly!
The wheelchair's control unit must reduce the maximum possible speed as soon as the
lifter is raised.
· Test the maximum speed reduction for correct function after any maintenance work or
modifications to the wheelchair.
8.1
Covers
8.1.1
Opening the rear cover panel
Refitting the front cover panel:
·
Loosen and remove the two knurled thumb screws (1) on the left and right side of the rear
casing.
·
Carefully raise the rear cover. The front part of the cover is held at the top by means of a
Velcro ® strip. You must also release this.
Refitting the rear cover panel:
·
Refit the parts in reverse order.
·
Tighten the knurled thumb screws hand-tight.
38
®
Invacare
- STORM
4