Adjust Menu Display Brightness; Assign Custom Names To Inputs - Krell Industries KPS 25sc Instructions For Use Manual

Customizing Configurations, continued
To change the amplifier control:
1. Press the menu control button (29) or menu
key. The word MENU appears in the menu dis-
play (26).
2. Rotate the level knob (25) or press level key
until the word AMPCTL appears.
3. Press the menu control button (29) again.
AUTO (factory default) appears in the menu
display.
4. Rotate the level knob or press the level key
until the word OFF appears.
5. Press the menu control button (29) or menu
key to lock in the setting.
6. Press the menu control button (29) or key
again to exit the menu mode.
To power on the amplifiers after the KPS 25sc
is powered on, point the remote control at the
KPS 25sc, and press the amplifier power key.
ADJUST MENU DISPLAY
BRIGHTNESS
This function lets you increase menu display
brightness for easy viewing or completely dim
the menu display.
1. Press the menu control button (29) or menu
key. The word MENU appears in the menu
display (26).
2. Rotate the level knob (25) or press level key
until the word BRIGHT appears.
3. Press the menu control button (29) or key
again. The current brightness level appears
in the menu display (26).
4. Rotate the level knob (25) or press the level
key to view brightness levels.
5. When the brightness level is set to the
desired level, press the menu control button
(29) or key to lock in the setting.
6. Press the menu control button (29) or key
again to exit the menu mode.
ASSIGN CUSTOM NAMES
TO INPUTS
This function lets you assign custom rather than
generic names to digital or analog inputs on the
KPS 25sc, for ease of input identification and
use.
1. Press the menu control button (29) or menu
key. The word MENU appears =n the menu
display (26).
2.
Rotate the level knob (25) or press level key
until the word NAME appears.
3. Press the menu control button (29) or key
again. The word AES appears.
4. Rotate the level knob (25) or press level key
to select the input to which you want to
assign a custom name.
5. Press the menu control button (29) or key.
The word PHONO appears.
6. Rotate the level knob (25) or press level key
to select the desired name.
7. Press the menu control button (29) or key
assign the selected name to the selected
input.
8. Press the menu control button (29) or key
again to exit the menu mode.
Note
The input for compact disc cannot be renamed.
30
Krell KPS 25sc