Table of Contents
Advertisement
Front Panel, continued
See Figure 3 on page 11
Digital Inputs and LEDs
The KPS 25sc is equipped with the following
digital inputs. The red LED above each button
illuminates when that input is selected.
14 CD Button
Use this button to select the internal compact
disc transport.
15 AES Button
Use this button to select the corresponding rear
panel input that ~s connected to an AES digital
source,
16 Optics1 Button
17 Optics2 Button
Use these buttons to select the corresponding
rear panel input that is connected to an EIAJ
fiber optic digital source.
18 Coax1 Button
19 Coax2 Button
Use these buttons to select the corresponding
rear panel input that is connected to a S/PDIF
coaxial source.
Analog Inputs and LEDs
The KPS 25sc is equipped with the following
analog inputs, The red LED above each button
illuminates when that input is selected.
20 B-1 Button
Use this button to select the corresponding rear
panel input that is connected to a balanced ana-
log source.
21 S-1 Button
22 S-2 Button
23 S-3 Button
Use these buttons to select the corresponding
rear panel input that is connected to a single-
ended analog source.
24 Tape Button
Use this button to select the corresponding rear
panel input that is connected to a tape source.
For instructions on using this function, see Tape
Input and Output, on page 25.
Volume Adjustment
and Menu Functions
25 Level Knob
Use this knob to increase or decrease system
volume level.
Volume level is shown in the
menu display (26). The level control knob
also used, along with the menu control button
(29), to select menu functions to customize
KPS 25sc features.
See Customizing Con-
figurations, on page 27.
26 Menu Display
The menu display shows volume level, balance
level, and menu function selection and status.
See Customizing Configurations,
on page
27.
27 Fixed Output Mute Button and LED
Use this button to mute the fixed output. The
LED illuminates when the fixed output is muted.
28 Variable Output Mute Button and LED
Use this button to mute the variable output. The
LED illuminates when the variable output is
muted.
29 Menu Button and LED
Use the menu control button to access menu
functions for customizing the KPS 25sc. The
LED illuminates when the menu feature is acti-
vated. See Customizing Configurations, on
page 27.
30 Phase LED
The absolute phase LED illuminates when the
absolute polarity of the variable or CAST out-
puts is reversed.
Krell KPS 25sc
13
Advertisement
Table of Contents
