Ricoh Aficio 220 Service Manual page 316

30 November 1999
APPENDIX 1 (FOR RUSSIAN-C)
1. RSS (REMOTE SERVICE SYSTEM)
1.1 RSS SET UP
[B]
[A]
A267R515.WMF
[G]

CAUTION
Unplug the machine power cord before starting the following procedure.
1. Remove the connector cover [A] (1 clip) and disconnect the cable.
2. Remove the rear cover [B] (4 screws).
3. Remove the duplex connector cover [C] (1 screw) and the lower rear cover [D]
(2 crews).
4. Install the RSS board [E] (2 screws).
5. Install the harness [F] between the RSS board and the BICU board (CN107).
NOTE: Remove the expansion box if the optional printer has been installed.
When connecting only one machine to the line adapter, skips step 6.
6. Set the jumper switch [G] on the RSS board as shown (default setting is 1-2).
7. Remove the cover [H] from the lower rear cover.
A267I305.WMF
APPENDIX-1
[C]
[D]
[E]
RSS SET UP
A267R705.WMF
[F]
A265I950.WMF
[H]