Ricoh Aficio 220 Service Manual page 149

DUPLEX UNIT INSTALLATION
[B]
6. Set the duplex unit [A] on the unit holder [B] or on the by-pass tray unit if it has
already been installed.
7. Attach the link [C] to the shaft [D] and secure it with the clip.
8. Connect the cable [E] and install the connector cover [F] (1 screw).
9. If the by-pass tray has already been installed, skip this step: Install the unit
holder cover [G] (2 screws).
10. Turn on the main power switch and check the duplex unit function.
[C]
[A]
[G]
3-32
20 September 1999
[D]
[F]
[E]
A896I104.WMF