Cd Player - Fiat 2013 500 ABARTH Owner's Manual

Hide thumbs Also See for 2013 500 ABARTH:
Table of Contents

Advertisement

190 UNDERSTANDING YOUR INSTRUMENT PANEL
are not entered correctly, then the SIRIUS subscription
will not be able to be transferred to the new radio and
will not be active when installed in the customer's
vehicle.

CD Player

Introduction
This chapter describes the operation of the CD player
only. To operate the radio, refer to the description in the
"Functions and Adjustments" chapter.
CD Player Selection
To activate the CD player built into the equipment,
proceed as follows:
• Load a CD with the equipment switched on. The first
track will start to play.
or
• If a CD has already been loaded, turn on the radio and
then briefly press the MEDIA button to select the "CD"
function mode. The last track listened to will start to
play.
It is advisable to use original CDs to ensure optimal
playing. If CD-R/RWs are used, we recommend using
good quality media that are burned at the slowest speed
possible.
CD Loading/Ejecting
To load the CD, insert it gently into the slot to activate the
motorized loading system, which will position it cor-
rectly.
The CD can be loaded with the radio off and the ignition
key turned to ON/RUN. In this case, the radio will
remain off. When the radio is turned on, the last source
listened to before being switched off, will be activated.

Advertisement

Table of Contents
loading

Table of Contents