Fiat 2013 500 ABARTH Owner's Manual page 163

Speed Beep (Speed Limit)
With this function it is possible to set the car speed limit
(mph or km/h); when this limit is exceeded the driver is
immediately alerted.
To set the speed limit, proceed as follows:
1. Briefly press the SET ESC button. The display will
show the message (Speed Beep).
2. Press the UP or DOWN
limit activation (On) or deactivation (Off).
3. When the function is activated (On), briefly press the
SET ESC button to display the presently set activation
speed. Pressing the UP
selects the speed limit. Press SET ESC to confirm
selection.
NOTE: Selection is possible between 20 and 125 mph
or km/h, depending on the selected unit. The setting will
increase/decrease by five units each time the UP/DOWN
button to select speed
or DOWN buttons
UNDERSTANDING YOUR INSTRUMENT PANEL 161
button is pressed. Press and hold the UP/DOWN button
to increase/decrease the setting rapidly. Save the setting
by briefly pressing the button when you approach the
required setting.
• Briefly press the SET ESC button to go back to the
menu screen, or press and hold the SET ESC button
(approximately one second) to go back to the main
screen without storing the settings.
To cancel the setting, proceed as follows:
1. Briefly press the SET ESC button. "On" will flash on
the display.
2. Press the DOWN button. "Off" will flash on the
display.
3. Briefly press the SET ESC button to go back to the
menu screen, or press and hold the SET ESC button
(approximately one second) to go back to the main
screen without storing the settings.
4