Fiat 2013 500 ABARTH Owner's Manual page 170

168 UNDERSTANDING YOUR INSTRUMENT PANEL
Button Volume (Button Volume Adjustment)
This function may be used to adjust the volume of the
beep accompanying the buttons. SET ESC, UP
DOWN buttons can be adjusted according to 8 levels.
To adjust the volume, proceed as follows:
1. Briefly press the SET ESC button. The previously set
volume "level" will flash on the display.
2. Press the UP or DOWN
3. Briefly press the SET ESC button to go back to the
menu screen, or press and hold the SET ESC button
(approximately one second) to go back to the main
screen without storing the settings.
Belt Buzzer (Buzzer Activation For S.B.R. Indication)
This function will only be displayed after a FIAT Group
Automobiles studio has deactivated the S.B.R. system.
or
button for setting.
Hill Start Assist
This function is used when starting a vehicle from a stop
on a hill. Hill Start Assist maintains the same level of
brake pressure the driver applied for a short period of
time after the foot has been removed from the brake
pedal.
Proceed as follows to switch this function on or off:
1. Briefly press the SET ESC button. "On" or "Off" will
flash on the display (according to previous setting).
2. Press the UP or DOWN
3. Briefly press the SET ESC button to go back to the
menu screen, or press and hold the button (approxi-
mately one second) to go back to the main screen
without storing the settings.
button for setting.