Table of Contents
Advertisement
Sostenut (Sostenuto)
Sostenuto (CC#66) messages will be assigned to the foot switch.
Pressing the foot switch transmits a value of 127, and releasing it
transmits a value of 0.
In Play mode, the main display will indicate "Sostn--" when you
operate the foot switch.
Soft (Soft Pedal)
Soft pedal (CC#67) messages will be assigned to the pedal.
Pressing the foot switch transmits a value of 127, and releasing it
transmits a value of 0.
In Play mode, the main display will indicate "Soft--" when you operate
the foot switch.
Portmnt (Portamento)
Portamento (CC#65) messages will be assigned to the pedal.
Pressing the foot switch transmits a value of 127, and releasing it
transmits a value of 0.
In Play mode, the main display will indicate "Porta--" when you
operate the foot switch.
CtrlChg# (Control Change)
A control change message will be assigned to the foot switch. If you
choose CtrlChg#, press the OCTAVE SHIFT/CURSOR [®] key to
proceed to "Control Change Select." ( p.37 "Assigning a control
change")
3
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to "MIDI
Channel" (specify the MIDI channel).
(Red)
4
Use the main encoder or the pads to select the MIDI channel on which
the MIDI message will be transmitted. The range is 1–16 (ch). ( p.4
"About the trigger pad functions–Input numerical values")
(Green)
Press the [ENTER] key.
5
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you've made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see "Scene mode–[16] WRITE"
( p.55).
Assigning a control change
If you chose CtrlChg# for "Message Select," you'll also need to make
settings for "Control Change Select," "MIDI Channel," and "Pedal Type."
1
Choose CtrlChg# for "Message Select," and then press the OCTAVE
SHIFT/CURSOR [®] key to move to "Control Change Select" (select
the control change number).
(Red)
2
Use the main encoder or pads to select the desired control change
number in a range of 0–127. ( p.4 "About the trigger pad functions–
Input numerical values")
3
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to "MIDI
Channel" (specify the MIDI channel).
(Green)
4
Use the main encoder or the pads to select the MIDI channel on which
the MIDI message will be transmitted. The range is 1–16 (ch). ( p.4
"About the trigger pad functions–Input numerical values")
Operation–Setting mode
(Green)
(Green)
37
Advertisement
Table of Contents
