Table of Contents
Advertisement
Appendices–Troubleshooting
Connected external device or software does not synchronize
• Could the KONTROL49's MIDI Clock tempo be set to "Clock Off"?
• Check the MIDI Clock settings of the connected device or software.
Keyboard or pads do not transmit velocity
• If keyboard or pad velocity is assigned to the bend/wheel, the keyboard
or pad velocity is ignored if the value is other than zero.
• Check the velocity settings. (Keyboard:
(Keyboard setting)," Pads 1–8:
assignment)," Pads 19–16:
When you assign Polyphonic Pressure to the bend/wheel and play
multiple keys, aftertouch does not apply to some keys
• When using Polyphonic Pressure, if you hold down more than one note
on the keyboard, aftertouch applies only to the note you played last.
Notes are stuck
• If note messages are assigned to a pad, and the pad is set to Toggle
operation, the corresponding note-off message may not be transmitted in
some cases. If this occurs, execute the Message mode command [3] All
Note Off ( p.50) or [1] Panic ( p.49).
60
p.38 "[12] KEYBOARD
p.24 "[3] PAD 1–8 (PAD 1–8
p.26 "[4] PAD 9–16 (PAD 9–16 assignment)")
Advertisement
Table of Contents
