Xerox DocuPrint C2255 Quick Referenc Manual page 63

Hide thumbs Also See for DocuPrint C2255:
Table of Contents

Advertisement

Message
Check Tray N
<size and orientation> <type>
(N: Whichever from 1 to 4)
Close Cover X
(X: A, B or C)
Close Front Cover
Completed with error
***-***
Insert Drum
Cartridge X
(X: Whichever from R1 to R4)
Insert Toner
Cartridge: X
(X: K, C, M, or Y)
Insert Waste Toner
Container R5
Load Tray N
<size and orientation> <type>
(N: Whichever from 1 to 4)
Open Front Cover.
Swing Handle to the
RIGHT to lock.
Close the cover.
Symptom/Cause/Remedy
The correct type of paper is not loaded in the paper tray N.
Load paper of the size, orientation, and type indicated by the message, into paper
tray N.
Note
• Pressing the <Information> button will display detailed information on the control
panel.
Refer to
• "Loading paper into Trays 1 through 4" (P. 46)
Cover X is open.
Securely close the displayed cover.
The front cover is open.
Close the front cover.
Printing could not be performed correctly because an error occurred.
Check the displayed error code (***-***) and correct the problem.
Refer to
• "Error Codes" (P. 67)
Drum cartridge X is not installed.
Install the indicated drum cartridge.
Refer to
• "Replacing Drum Cartridges" (P. 73)
• "Types of Consumables" (P. 69)
The X toner cartridge is not installed.
Install the indicated toner cartridge.
Note
• Pressing the <Information> button will display detailed information on the control
panel.
Refer to
• "Replacing Toner Cartridges" (P. 71)
The waste toner bottle is not installed correctly.
Install a waste toner bottle that is appropriate for the printer.
Refer to
• "Replacing the Waste Toner Bottle" (P. 75)
• "Types of Consumables" (P. 69)
The tray that contains the paper specified for printing (either the size or type) is out of
paper.
Load paper into the applicable tray. This message also appears when none of the
printer's trays are loaded with the paper specified for printing (either the size or type).
In this case, change the size, orientation, or type of one of the printer's trays so it
matches the settings shown on the display.
Refer to
• "Loading paper into Trays 1 through 4" (P. 46)
The lever inside the front cover that locks the drum cartridge cover is not in the
correct position.
Reposition the lever to the right and close the cover.
Error Messages and Error Codes
63

Advertisement

Table of Contents
loading

Table of Contents