Control Via Midi; Connecting A Midi Device Or Computer - Korg ToneWorks AX3000G Owner's Manual

Control via MIDI

IDI stands for Musical Instrument Digital Interface, and is a world-wide
M
standard for exchanging various types of musical data between electronic
musical instruments and computers. When MIDI cables are used to con-
nect two or more MIDI devices, performance data can be exchanged between the
devices, even if they were made by different manufacturers.
The AX3000G can use MIDI to communicate in the following ways with another
MIDI device. You can:
• Operate the AX3000G to switch programs on an external MIDI device, or switch
the AX3000G's programs from an external MIDI device. →"Program change"
• Operate a connected optional foot controller to control an external MIDI device,
or use an external MIDI device to control the AX3000G's volume or effects.
→"Control change"
• Use the Sound Editor to edit parameters. →"Parameter change"
• Backup (save) and restore (load) the AX3000G program data. →"Backing up
and restoring program data"
NOTE: In order to do the above things, you need to use a MIDI cable to connect
the AX3000G and your external MIDI device, and set the MIDI channels appropri-
ately. →"Connecting a MIDI device or computer," "Setting the MIDI channel"
NOTE: If your external MIDI device does not recognize certain types of MIDI mes-
sages, those messages cannot be used for control. Check the "MIDI implementa-
tion chart" of the AX3000G and of your external MIDI device.
C
ONNECTING A
If you want to control an external MIDI device from the AX3000G, connect a MIDI
cable from the AX3000G's MIDI OUT jack to the MIDI IN jack of your external MIDI
device .
If you want to control the AX3000G from a MIDI sequencer or other external MIDI
device, connect a MIDI cable from your external MIDI device's MIDI OUT jack to
the AX3000G's MIDI IN jack.
When you connect the AX3000G to a MIDI sequencer or sound editor, data will
normally be sent in both directions, so you will need to connect MIDI cables from
the AX3000G's MIDI OUT jack to the external MIDI device's MIDI IN jack and then
from the device's MIDI OUT jack to AX3000G's MIDI IN jack.
MIDI IN
AX3000G
MIDI D
EVICE OR
To a MIDI sequencer/computer
MIDI interface
MIDI OUT
MIDI IN
MIDI OUT
C
OMPUTER
NOTE: You will need a MIDI inter-
face in order to connect your com-
puter with AX3000G.
Some MIDI interfaces are not able
to transmit or receive MIDI exclu-
sive messages correctly.
48