Korg ToneWorks AX3000G Owner's Manual page 37

Korg modeling signal processor owner's manual
Hide thumbs Also See for ToneWorks AX3000G:
Table of Contents

Advertisement

4. BI CHORUS (BI CHORS)
This is a chorus model unique to the AX3000G. It provides two chorus units, CHO-
RUS 1 and CHORUS 2, and lets you connect the two units not only in series or in
parallel, but also to synchronize or de-synchronize the two LFOs. It produces a
variety of tones that cover a range from wonderfully spacious sounds to bizarre
flanger-like sounds with complex modulation.
[1] "DEPTH"
0.0–10.0
[2] "SPEED 1" 0.1–10.0[Hz]
[3] "SPEED 2" 0.1–10.0[Hz]
NOTE: This will not function if MODE is set to P2 or P3.
[4] "RESO"
0.0–10.0
[5] "MODE"
S/P1/P2/P3
NOTE: If P2 or P3 is selected, the speed is adjusted by the SPEED 1 (value knob 2).
5. DUO PHASE (DUO PHAS)
This is an amazing phaser that provides two six-stage phasers; PHASER 1 and
PHASER 2. They can be connected in series (to make a pseudo-twelve-stage
phaser!) or in parallel, and you can also synchronize or de-synchronize the two
LFOs.
[1] "DEPTH"
0.0–10.0
[2] "SPEED 1" 0.1–10.0[Hz]
[3] "SPEED 2" 0.1–10.0[Hz]
NOTE: This will not function if MODE is set to S2, P2, or P3.
[4] "RESO"
0.0–10.0
[5] "MODE"
S1, S2, P1, P2, P3
* Adjusts the modulation depth of CHORUS 1/2.
* Adjusts the modulation speed of CHORUS 1.
* Adjusts the modulation speed of CHORUS 2.
* Adjusts the amount of resonance for CHO-
RUS 1/2.
Specifies the connection and LFO for CHO-
RUS 1/2.
S: CHORUS 1/2 are connected in series.
P1: CHORUS 1/2 are connected in parallel.
P2: CHORUS 1/2 are connected in parallel,
and their LFOs are synchronized.
P3: CHORUS 1/2 are connected in parallel,
and their LFOs are synchronized in
opposite phase (Stereo mode).
* Adjusts the modulation depth of PHASER 1/2.
* Adjusts the modulation speed of PHASER 1.
* Adjusts the modulation speed of PHASER 2.
* Adjusts the amount of resonance for
PHASER 1/2.
Specifies the connection and LFO for
PHASER 1/2.
S1: PHASER 1/2 are connected in series.
S2: PHASER 1/2 are connected in series and
their LFOs are synchronized to create a
pseudo-twelve-stage phaser.
P1: PHASER 1/2 are connected in parallel.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents