Heathkit H14 Manual page 7

Page 5
~I-_----------------
•
•
PAPER
Paper Type ......•..................•......•....
Paper Feed .............•....•.•....•......•....
Forms Control ..........•....•......•......•....
INTERFACE
Electrical ...........•.•....•....• : .....•......•.
Connector ..........•......•....•...........•...
Data Format .............•....•......•....•.....
Character Code .........•....•.•..•.•......•.....
Line Buffering .....................•.•....•.....
Baud Rates ..........•.•....•....•......•....•..
PHYSICAL
Overall Dimensions
Net Weight ....................•...........•....
Ambient Temperature ........•....•.•...........
Power Requirements ..........•....•.............
Edge-punched f8.nfolded forms. 3.0" to 9.5" wide and
maximum thickness of 0.006".
Sprocket. with adjustable width.
11" form is selected at power up. Any fotm depth from
0.021" to 1365" may be electronically selected.
Serial RS-232C or 20 rnA current loop. Handshake
control signals (reverse channel or busy signal).
25 pin male EtA connector on 6 foot cable.
Asynchronous bit serial; 1 start. 8 data. 2 stop bits on
110 baud and 1 stop bit on all olhers.
ASCII.
256 Characters.
110.150.300. BOO, 1200,2400, or 4800.
18-1/3" W x 14-1/3" D x 4-4/5" H
(4B.5cm W x 36.3 cmD x 12.1 cmH) less paper tray.
25 lb•. (ll.3
kg•.).
10"C to 40"C.
100-135 volts 50-60, or 200-270 volts 50-60 Hz, 100
watts maximum.
•
•
•
•
The Heath Company reserves the right to discontinue
products and to change specifications at any time
without incurring any obligation to incorporate new
features in products previously sold.