Messages Regarding Printing Or Adjustment; Borderless Printng Not Possible. Paper Stretched Or Shrank; Before Borderless Printing, Move The Blue Platen Switch; Blue Platen Switch Is Dirty - Canon iPF8400SE imagePROGRAF User Manual

Borderless printng not possible. Paper stretched or shrank.

Messages regarding printing or adjustment

Messages regarding printing or adjustment
Cannot adjust printhead. .............................................................................................................................................. 624
Borderless printng not possible. Paper stretched or shrank. ...................................................................... 622

Before borderless printing, move the blue platen switch. ............................................................................. 622

Borderless printng not possible. ............................................................................................................................... 618

Blue platen switch is dirty. ........................................................................................................................................... 622

Move the blue platen switch No.xx to the right. (xx represents a number) ........................................... 622

Cannot adjust paper feed. ........................................................................................................................................... 622

Check printed document. ............................................................................................................................................ 623
Borderless printng not possible. Paper stretched or shrank.
Borderless printng not possible. Paper stretched or shrank.
The loaded roll has expanded or contracted due to environmen-
tal conditions, making it wider or narrower than the supported
width for borderless printing.
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
The blue Switch on the platen was set to the side oppo-
site ● when a borderless print job was received.
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause
The blue Switch on the platen is dirty.
Move the blue platen switch No.xx to the right. (xx represents a number) Move the blue platen switch No.xx to the right. (xx represents a number)
The printer has detected that the blue Switch on the platen nee-
ded in maintenance during printing is set away from the ● mark.
Cannot adjust paper feed. Cannot adjust paper feed.
The Printhead nozzles are clogged.
622
Highly transparent film is loaded that cannot be
used for automatic feed amount adjustment.
Cause
Cause
Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
Cause
Cause
Execute Adj. Quality again, as follows.
1.
2.
3.
4.
Press the OK button to clear the error, and then adjust the feed amount manually.
Press the OK button to stop printing.
Use each type of paper only where the recommended environ-
mental conditions are met. For details on environmental condi-
tions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.")
Corrective Action
➔
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.")
Press the OK button to clear the error.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.")
(See "Manual Banding Adjustment.")
Corrective Action
Corrective Action
P.596
➔
P.564
Corrective Action
Corrective Action
P.545
➔
P.546
➔
P.527
➔
P.528
➔
iPF8400SE
P.330
➔
P.596
➔
User's Guide