Table of Contents
Advertisement
LDAP Function:
Use this setting to turn LDAP search on or off.
Domain Name: Input the name of the domain to which the LDAP
server belongs.
LDAP Server Name/IP Address:
Input the LDAP server address.
The initial default setting is blank.
You can input the LDAP Server Name or IP Address.
Login Name:
Input the user name.
Password:
Input the password.
For LDAP authentication, care must be taken since the
password is sent on the network with cleared text.
Port Number: Enter the LDAP server port number.
The initial default setting is 389.
Search Root:
Input the search start point. (ex: dc=ldapsv, dc=local)
The initial default setting is blank.
1.5 Administrator Mode
1-45
Advertisement
Table of Contents
